Table of Contents
Advertisement
2. Basic settings
Open the door and press the main power switch.
"Welcome to your new ASKO. This is a first time set up." is shown on the display. It is important
that you choose the right settings to ensure good dishwashing results.
Main power switch
Settings
1.
Language
Select the language to be shown on the display.
2.
Power 10 Amp/16 Amp
This dishwasher has been designed to be able to be connected to an electrical supply network
with fuses for 10 Amp or 16 Amp.
The water in the dishwasher will be heated more quickly, and the dishwashing program will run
more quickly, if you select 16 Amp.
Select 10 Amp or 16 Amp according to the electrical supply network in your property.
Pre-selected at factory: 16 Amp
3.
Rinse aid 0/1/2/3/4/5/TAB
Drying is faster and a better result is achieved if you use rinse aid. You will also achieve a better
dishwashing result with clear and spotless dishes.
Select rinse aid dosage. The rinse aid dispenser can be adjusted between 0 (Off) and 5 (High
dosage).
When using an all-in-one detergent that contains rinse aid, you can activate the setting TAB. Read
more about all-in-one detergent in the chapter Using the dishwasher.
Pre-selected at factory: 5
1)
The setting will be deactivated following the activation of automated dosage of commercial rinse aid. Rinse aid
will not then need to be refilled.
Before washing for the first time
Select setting
Confirm setting
1)
7
Advertisement
Table of Contents
