Table of Contents
Advertisement
Settings
Table continued from last page
Settings
11.
Auto dose system
12.
Vent the hose
13.
Power
14.
Auto Open
15.
Salt chamber is
empty, top up
before running
program
Exit
26
Options
Detergent:
1-60/Off
Rinse aid:
1-60//Off
Detergent
Rinse aid
10 Amp/16 Amp
On/Off
On/Off
Setting for the automated dosage of
detergent. Select for how many seconds the
detergent is to be added.
The detergent will be dispensed during the
main wash.
Setting for the automated dosage of rinse
aid. Select for how many seconds the rinse
aid is to be added.
The rinse aid will be dispensed during the
final rinse.
The dishwasher dispenses the detergent for
30 seconds.
The dishwasher dispenses the rinse aid for
30 seconds.
This dishwasher has been designed to be
able to be connected to an electrical supply
network with fuses for 10 Amp or 16 Amp.
The water in the dishwasher will be heated
more quickly, and the dishwashing program
will run more quickly, if you select 16 Amp.
Select 10 Amp or 16 Amp according to the
electrical supply network in your property.
The dishwasher door opens automatically,
which improves the drying results. Wait until
the dishwasher indicates that the program
has ended and the dishes have cooled
before unloading the dishwasher. (If the
dishwasher is built-in the surrounding
furnishings must be resistant to any
condensation from the dishwasher.)
Setting to prevent a dishwashing program
from starting when the salt compartment is
empty.
(This setting is not active if Water hardness
is set to 0.)
To exit the dishwasher's Settings menu,
select Exit and confirm your selection with
Start/Stop.
Advertisement
Table of Contents
