Asko DWCBI331.W Operating Instructions Manual page 24

Settings
Table continued from last page
Settings
4. Display settings
5. Feedback sound
6. Buzzer volume
7. Rinse aid
3)
SANI, SANI Quick: Time left+Status
4)
SANI, SANI Quick: Time left+Status+Temperature
5)
The setting will be deactivated following the activation of automated dosage of commercial rinse aid. Rinse aid
will not then need to be refilled.
24
Options
Contrast top
display1/2/3/4
Logo in top display On/Off
Temp in last program
On/Off
Info in front display1/2
0/1/2/3
0/1/2/3
5)
0/1/2/3/4/5/TAB
For adjusting the contrast of the top display.
Setting to hide the logo shown on the
display.
Temperature of the final rinse in the
most-recently run program. This information
is shown on the dishwasher's display when
the machine is next switched on.
You can choose the information that is shown
on the front display.
1 Status indicator Time left
Off
2 Status indicator Time left+Status
On
This sound is used to confirm each button
press.
The buzzer indicates when a dishwashing
program has ended.
Error messages are always indicated by a
loud buzzer.
Setting for rinse aid dosage. The rinse aid
dispenser can be adjusted between 0 (Off)
and 5 (High dosage).
Increase the rinse aid dosage:
• If the dishes have water marks.
Decrease the rinse aid dosage:
• If the dishes have a sticky white/blue
film.
• If the dishes are streaked.
• Build-up of foam. If you have very soft
water, the rinse aid can be diluted 50:50
with water.
3)
4)