Cable The Firewall - Cisco Firepower 1100 Getting Started Manual

Cable the Firewall

Figure 2: Edge Network Deployment
Cable the Firewall
To cable one of the recommended scenarios on the Firepower 1100, see the following steps.
Note
Procedure
Step 1
Install the chassis. See the
Step 2 Cable for a separate management network:
Cisco Firepower 1100 Getting Started Guide
10
Other topologies can be used, and your deployment will vary depending on your basic logical network
connectivity, ports, addressing, and configuration requirements.
hardware installation
Threat Defense Deployment with the Management Center
guide.