Connect Power Cable - Cisco 1100 Series Hardware Installation Manual

Install and Connect the Router

Connect Power Cable

Power supply of the Cisco 1100 Terminal Gateway Routers is through AC and DC power adapter.
Warning This equipment must be grounded. To reduce the risk of electric shock, never defeat the ground conductor or
operate the equipment in the absence of a suitably installed ground conductor. Contact the appropriate electrical
inspection authority or an electrician if you are uncertain that suitable grounding is available. Statement 1024
For HVDC and DC systems:
Warning To reduce risk of electric shock and fire, a readily accessible two-poled disconnect device must be incorporated
in the fixed wiring. Statement 1022
Hardware Installation Guide for the Cisco 1100 Terminal Gateway
Connect Power Cable
25