Introduction; Contacting Quatro Air - Quatro Premium iVAC Series Operation And Maintenance Manual

iVAC Premium Series Operation and Maintenence Manual

Introduction

Congratulations on your purchase of a QUATRO iVac System, an advanced effective indoor dust collection system
designed specifically to remove particulate matter at the source. You can expect a noticeable improvement in air quality as
the iVac System begins the process of reducing microscopic airborne particulate.
The iVAC features a FIVE-step AUTOMATIC method of operation:
1. Rear entry knockout chamber forces heavier particles to the tray.
The tray beneath the filter can be easily removed and cleaned,
without manipulating the filter. This provides a neat and clean
debris removal method
2. Main filter captures and holds lighter dust particles
3. AUTOMATIC CLEANING SYSTEM loosens and releases lighter
particles captured in the filter to fall down into tray
4. HEPA filter captures and holds fine particles protecting the motor
and ensuring a clean output
5. High-pressure blower section overcomes pressure across the hose
and filter. UP/DOWN Arrows on control panel allow you to increase
and decrease speed in 8-10 increments
WARNING – To reduce the risk of damage to your system read
and follow all instructions. Failure to follow these guidelines may
result in undesired operation or damage that will not be covered under
warranty.

Contacting Quatro Air

If you require assistance with this or any other Quatro Air product, please call or email technical support
(tech@quatroair.com). We value your comments.
To help us assist you more effectively with problem reports, the following information may be required when contacting
Quatro Air Support:
• Equipment model (e.g., iVac, AF400, BioScan).
• The serial number of any component you believe to be defective.
• Actions performed immediately before the problem occurred, if applicable.
• Any additional comments.
Page 4
© Quatro Air Technologies| MAY 2019 | All rights reserved |
Introduction