Filter And Dust Tray Access - Quatro Premium iVAC Series Operation And Maintenance Manual

iVAC Premium Series Operation and Maintenence Manual

Filter and Dust Tray Access

Access to all filters are through the front access door(s) of the iVac Series.
iVAC Compact
MAIN FILTER
Removing Filters
1. Remove the dust/debris tray.
2. Loosen the plastic wingnuts located below the filter, accessible from dust/debris tray section.
Page 17
Filter & Dust
Tray Access
Door
HEPA Filter
FCS Quick Connect Motor
Main Filter
Dust/Debris Tray
Filter Access
Door
Debris/Dust Tray
Access Door
iVAC Compact and iVAC 1:
Loosen/remove 2 wingnuts
Remove Main filter from above
iVAC 2:
Loosen/remove 6 wingnuts
Remove Main filter from above
© Quatro Air Technologies| MAY 2019 | All rights reserved |
Filter Service and Replacement
iVAC 1 and iVAC 2