Saxby Lighting Albus CCT Instruction Manual

Wiring
having correctly identified the wiring from your existing light fitting and connect to the terminal block (not supplied) in
the following way:
SUPPLY
NEUTRAL
SWITCHED LIVE
Technical data
Supply
220-240 V~, 50 Hz
Voltage:
Bulb
1.5W LED module (SMD) CCT, 3000/4000/6500K
Type:
This product contains a light source of energy efficiency class G.
Non-replaceable light source
Non-replaceable control gear
Conformity with all relevant UKCA Directive requirements.
Conformity with all relevant EC Directive requirements.
The power supply is Double Insulated and does not require connection to an Earth circuit.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
exist. Check with your Local Authority or local store for recycling advice.
This product is not suitable for dimming.
This product is rated at IP65.
65
IP
Caution! Risk of electric shock!
Care and Safety
We recommend cleaning with a soft dry cloth. Do not use solvents or abrasive cleaners as these could damage the finish.
For your safety, always switch off the power supply before cleaning.
For further information, please visit https://www.lighting-info.co.uk/99761
V1 18/11/2021
UK Manufacturer: BH17 7BY
EU Manufacturer: Brilliant AG,
Brilliantstrasse 1, D-27442 Gnarrenburg
LIGHT FITTING
Check that...
BLUE (N)
You have correctly identified the wires.
The connections are tight.
BROWN (L)
No loose strands have been left out of
the connection block.
Instruction manual
Albus CCT
99761
www.saxbylighting.com