Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Chauvin Arnoux AEMC 6417
Summary of Contents for Chauvin Arnoux AEMC 6417
- Page 1 Quick Start Guide ENGLISH 6417 CLAMP-ON GROUND TESTER WITH AEMC INSTRUMENTS ®...
-
Page 2: Statement Of Compliance
Statement of Compliance Chauvin Arnoux , Inc. d.b.a. AEMC Instruments ® ® certifies that this instrument has been calibrated using standards and instruments traceable to international standards. We guarantee that at the time of shipping your instrument has met its published specifications. -
Page 3: Product Packaging
PRODUCT PACKAGING Shipping Contents: Hard Accessory Case Clamp-on Ground Tester Model 6417 Cat. #2141.50 Cat. #2141.02 Bluetooth Adapter Cat. #2126.45 5 Ω Calibration Loop Cat. #2141.51 Also Included: (4) 1.5 V AA Batteries (1) Wrist Strap (1) Safety Sheet (20 languages) (1) Quick Start Guide (1) USB Stick with User Manual &... - Page 4 Thank you for purchasing an AEMC Instruments Clamp-on Ground Tester ® Model 6417. For the best results from your instrument and for your safety, read the enclosed operating instructions, and comply with the precautions for use. These products must be used only by qualified and trained users. Signifies that the instrument is protected by double or reinforced insulation.
-
Page 5: Precautions Before Use
Precautions Before Use This instrument and its accessories comply with safety standards EN 61010‑1, EN 61010‑030, and EN 61010‑2‑032 for voltages of 600 V in Category IV at an altitude below 2000 m with a pollution degree of 2 or less. Failure to observe the safety instructions may result in electric shock, fire, explosion, or destruction of the instrument and installations. -
Page 6: Control Features
Control Features SET-UP HOLD 1. Head Assembly: Consists of two individually shielded magnetic cores. 2. Guard: Safety guard; do not place hands above this guard. 3. Lever: Opens or closes jaws. : Toggles the display backlight ON/OFF. 5. MEM: Stores measurements into memory. 6. -
Page 7: Button Functions
Button Functions Button Description When the rotary switch is set to Ω+A or A: • Increases the brightness of the OLED display. ▲ - Makes it easier to read the display in an environment with strong background illumination. Highlighting is activated for 30 seconds. When the rotary switch is set to SET-UP or MR: •... -
Page 8: Instrument Configuration (Set-Up)
Instrument Configuration (SET-UP) The SET-UP position allows the user to set the following parameters in the instrument’s configuration. NOTE: These parameters can also be configured in DataView ® Function Erases stored measurements. Enables/disables the buzzer. Enables/disables Auto Power OFF. Sets the impedance alarm threshold (Ω). Sets the voltage alarm threshold (V). -
Page 9: Turning The Instrument On
Turning the Instrument ON ■ Set the rotary switch to any position, except OFF, with the clamp closed and not clamped around any conductor. ■ All icons on the display will light up for approximately two seconds. Turning Bluetooth ON 1. -
Page 10: Displaying Stored Measurements
If the instrument is returned for calibration, we need to know if you want a standard calibration, or a calibration traceable to N.I.S.T. (Includes calibration certificate plus recorded calibration data). Ship To: Chauvin Arnoux , Inc. d.b.a. AEMC Instruments ®... -
Page 11: Technical And Sales Assistance
Service Department (see address below), then return the instrument along with the signed CSA Form. Please write the CSA# on the outside of the shipping container. Return the instrument, postage or shipment pre‑paid to: Ship To: Chauvin Arnoux , Inc. d.b.a. AEMC Instruments ®... - Page 12 06/22 99‑MAN 100396 v6 AEMC Instruments ® 15 Faraday Drive • Dover, NH 03820 USA Phone: (603) 749‑6434 • (800) 343‑1391 • Fax: (603) 742‑2346 www.aemc.com © Chauvin Arnoux, Inc. d.b.a. AEMC Instruments. All Rights Reserved.