Temperature Display; First Use - Silvercrest SEM 1100 D3 Operating Instructions Manual

Temperature display

The temperature indicator 2 indicates how far the appliance has heated up .
As soon as you switch the appliance on, it starts heating up until the pointer is
approximately in the middle between 80°C and "
lights up . The "Espresso" control lamp t flashes white .
Once the pointer reaches the red portion of the scale, the temperature is high enough
to prepare an espresso . The "Espresso" control lamp t lights up permanently .
When you press the "Steam" button
white . The appliance continues to heat up and the pointer rises higher until it
reaches the range of the scale between "
Once the pointer reaches the range between "
high enough to produce steam . The "Steam" control lamp 5 lights up permanently .

First use

1) Clean the sieve holder i, the measuring spoon a, the espresso sieve o p,
the drip grille q and the water tank 9 as described in the section "Cleaning
and Care" .
2) Place the appliance on a level and heat-resistant surface . Ensure that a mains
power socket is in the vicinity .
3) Insert the drip grille q so that the red float e can protrude through the hole
in the drip grille q .
■ 8 │ GB │ IE │ NI │ CY
" . The operating lamp z
4, the "Steam" control lamp 5 flashes
" and " " .
" and " " the temperature is
SEM 1100 D3