Ordering Replacement Parts - Silvercrest SEM 1100 D3 Operating Instructions Manual

11) As soon as the "Espresso" control lamp t lights up continuously, press the
"Espresso" button
Allow the water to run through completely . Carefully pour out this water .
12) Repeat steps 10 to 11 once and then turn off the appliance .
13) After descaling, wipe off the appliance with a damp cloth to remove any
splashes of the descaler solution . Ensure that the appliance is completely dry
before the next use .
You can order more descaler s via our customer service (see section "Ordering
replacement parts") .
We recommend using the descaler s supplied with the appliance . You can also
use other commercially available descaling agents for espresso machines . If you
do so, proceed as described in the operating instructions of the respective descaler .

Ordering replacement parts

You can order replacement parts for this product on the Internet at
www.kompernass.com .
NOTE
► If you have problems with your online order, you can contact our service
centre by phone or e-mail .
► Please always quote the article number (e .g . IAN 123456_7890) when
ordering . You can find it on the title page of these operating instructions .
► Please note that online ordering of replacement parts is not possible for all
countries .
SEM 1100 D3
3 .
Scan the QR code with your smartphone/tablet .
You can use this QR code to go directly to our
website to view and order the available spare parts .
GB │ IE │ NI │ CY │ 19 ■