Changing The Batteries; Troubleshooting - Powerfix Profi HG00963 Operation And Safety Notes

Use / Troubleshooting

Changing the Batteries

Pull the battery compartment cover
the arrow to remove it from the battery compartment
Use the ribbon to remove the old batteries.
Place the new batteries
the battery compartment
Note: Ensure the correct polarity. This is shown in the
battery compartment
Push the battery compartment cover
opposite direction to the arrow back in order to close the
battery compartment

Troubleshooting

= Problem
= Cause
= Solution
The LED lamps
The batteries
Replace the used batteries
(see: "Changing the Batteries").
The batteries
Check the correct polarity of the batteries
(see: "Inserting the Batteries").
14 GB/IE/NI
of type 1.5 V
21
4
.
4
.
4
do not light up.
20
are flat.
21
21
have been inserted incorrectly.
21
in the direction of
3
.
back in the
3
with new ones
.
4
, AAA into
21