Roho Air Insert Setup - Permobil Tru-Shape Operation Manual

ROHO Air Insert Setup

Note: Read these warnings and follow the instructions on the next page if a ROHO Air Insert is included with the product.
Important Safety Information
WARNINGS:
- The air insert MUST be correctly installed in the foam
base.
- DO NOT use an under-inflated or over-inflated air
insert because 1) the product benefits will be reduced
or eliminated, resulting in an increased risk to skin
and other soft tissue, and 2) the individual may
become unstable and vulnerable to falling. Carefully
follow the instructions for inflation and hand check.
- After setting up the air insert for the first time, check
inflation frequently, at least once a day. Follow the
hand check instructions in this manual.
- DO NOT use the air insert on top of, or in conjunction
with, any other products or materials, except as
indicated in this manual. Using non-compatible
products or materials, whether inside or outside the
cover: 1) may reduce or eliminate the benefits of the
air insert, increasing the risk to skin or to other soft
tissue, and 2) may cause the individual to become
unstable and vulnerable to falling.
- DO NOT place obstructions between the individual
and the air insert. The components and the cover
MUST be compatible sizes and MUST be used as
directed in this manual. Except for the compatible
covers listed in "Product Specifications" in this
manual, placement of any items between the
individual and the air insert: 1) may reduce or
eliminate the benefits of the product, increasing the
risk to skin or to other soft tissue, and 2) may cause
the individual to become unstable and vulnerable to
falling.
Tru-Shape Operation Manual
WARNINGS, continued:
- If the air insert does not appear to be holding air,
or if you are not able to inflate or deflate the air
insert, see "Troubleshooting". Immediately contact
the equipment provider or Customer Support if the
problem persists.
- DO NOT use the air insert as a water flotation device
(e.g., a Life Preserver). It will NOT support you in
water.
- The air insert surfaces will acclimate to the
surrounding temperature. Take appropriate
precautions, especially when the air cells will contact
unprotected skin.
CAUTIONS:
- Periodically, check the air insert for damage and wear,
and replace if necessary.
- DO NOT use a pump, cover or repair kit other than
those compatible with the product.
- DO NOT allow the air insert to come into contact with
oil-based lotions or lanolin. They may degrade the
material.
- Prolonged exposure to ozone may degrade materials
used in the air insert, affect performance, and void the
warranty
- Changes in altitude may require adjustment to the air
insert.
- DO NOT expose the air insert to temperatures
above 70°C (158°F), which may damage air insert
components.
- If the air insert has been in temperatures lower than
32°F (0°C) and exhibits unusual stiffness, allow to
warm to room temperature.
Follow the instructions for air insert setup on the next page.
6