Using Built-in Tones
Adding Reverb to the Tone
1.
Press the
(REVERB) button to toggle
reverb on and off.
Lit when on
Selecting the Reverb Type
You can select from among the following four types of
reverb.
1: Room
2: Hall
3: Large Hall
4: Stadium
1.
Hold down the
reverb type selection screen shown below
appears on the display.
2.
(w, q) buttons to select the
Use the
reverb type you want.
3.
Press the
(REVERB) button to exit the
reverb type screen.
E-12
(REVERB) button until the
Adding the Chorus Effect to
the Tone
1.
Press the
(CHORUS) button to toggle
chorus (which adds depth to a tone) on and
off.
Lit when on
Selecting the Chorus Type
You can select from among the following four chorus
types.
1: LightChorus
2: Chorus
3: Deep Chorus
4: Flanger
1.
Hold down the
chorus type selection screen shown below
appears on the display.
2.
(w, q) buttons to select the
Use the
chorus type you want.
3.
Press the
(CHORUS) button to exit the
chorus type screen.
(CHORUS) button until the