Using A Pedal; Using The Sustain Button; Adding Reverb To Notes - Casio Casiotone CT-S200 User Manual

Using a Pedal

A pedal can be used to change notes while playing. Under
initial default settings, sustain is assigned to the pedal, so it
can be used as a damper pedal.
• A pedal unit does not come with the Digital Keyboard.
Purchase one separately from your retailer.
Selecting the Pedal Effect
1.
Press FUNCTION.
This displays the [FUNCTION] screen.
2.
Use the U and I buttons to select "Pedal".
• To go back to the previous screen, press the EXIT
button.
3.
Rotate the dial to select a pedal effect type.
The following shows the available pedal effects.
Setting
Description
(Display Text)
Pedal Sustain Playing notes while the pedal is
(Pedal Sustain) depressed causes the notes to be
sustained, even if the keyboard keys
are released.
Sostenuto Playing notes and then pressing the
(Sostenuto) pedal before the keyboard keys are
released causes the notes to be
sustained.
Soft (Soft) Pressing the pedal and playing notes
causes the notes to be slightly softened.
Start/Stop The pedal has the same functions as
the a button. It can be used to start
(Start/Stop)
and stop the metronome or rhythm play.
• After you rotate the dial once to select an option, you
also will be able to change the selection using the –
and + buttons.
• To return the setting to its initial default, press the –
and + buttons at the same time.
• To go back to the previous screen, press the BACK
button.
Controlling the Sound of a Performance

Using the SUSTAIN Button

While sustain is enabled, notes are sustained longer when
keyboard keys are released.
1.
Press SUSTAIN.
This momentarily displays "SUSTAIN ON".
• "SUS" at the top of the display indicates that sustain is
enabled.
2.
To disable sustain, press SUSTAIN again.

Adding Reverb to Notes

You can use the procedure below to add reverb to the notes
you play.
1.
Press FUNCTION.
This displays the [FUNCTION] screen.
2.
Use the U and I buttons to select "Reverb".
• To go back to the previous screen, press the EXIT
button.
3.
Rotate the dial to select the reverb type.
Available reverb type settings are: Off, Room 1 to 4, Hall
1 to 4, and Stadium 1 and 2.
• After you rotate the dial once to select an option, you
also will be able to change the selection using the –
and + buttons.
• To return the setting to its initial default, press the –
and + buttons at the same time.
• To go back to the previous screen, press the BACK
button.
EN-11