Casio Celviano 6ES1A User Manual page 19

Configuring the Digital Piano for Duet
Play
1.

Press the (MUSIC LIBRARY) button so its
lower lamp is lit.
Lit
• To practice with songs stored on a memory card,
press the  (CARD/INTERNAL) button so its lamp
is lit in place of the 
2.
While holding down the
button, press the 
This causes the Duet Mode on/off screen to appear.
3.

Press the (q) button to turn on the Duet
Mode.
4.

Press the (FUNCTION) button.
This exits the Duet Mode on/off screen and configures
the Digital Piano's keyboard for duet play.
This will cause the  (SPLIT) button lamp to flash.
5.
To turn off the Duet Mode, press the
(SPLIT) button so the SPLIT lamp goes out.
NOTE
• You also can use the procedure under "Duet Mode"
(page E-41) to turn the Duet Mode on or off.
B
(MUSIC LIBRARY) button.

(FUNCTION)
(SPLIT) button.

Changing the Octave of a Duet Mode
Keyboard
You can use the following procedure to change the
octave of the left and right Duet Mode keyboards.
1.
While holding down the
button, press the 
This displays the Duet Mode on/off screen shown in
step 2 under "Configuring the Digital Piano for Duet
Play" (page E-15). If the Duet Mode is currently turned
off, press the  (q) button to turn it on.
2.
Of the four C keys in the left keyboard, press
the one that you want to have located at
middle C.
• This will sound the note assigned to C4 and change
the octave of the left keyboard.
Example: To change the configuration so the leftmost C
key is middle C as shown below.
Leftmost C key (Pressed key)
C4 C5 C6 C7
1 octave higher than initial setting
3.
You can use the same procedure as step 2 to
select one of the C keys in the right keyboard
to shift its octave as well.
4.
Press the  (FUNCTION) button.
This exits the Duet Mode on/off screen and causes the
 (FUNCION) button lamp to go out.
The left and right keyboards will be configured
according to your settings.
NOTE
• Turning off the Duet Mode will clear your octave
shift settings and return the keyboard to its initial
default settings.
Using Built-in Tones
 (FUNCTION)
(SPLIT) button.
C3 C4 C5 C6
Unchanged
E-15