Using Built-In Tones; Turning On The Digital Piano And Playing Something; Selecting A Tone - Casio Celviano 6ES1A User Manual

Using Built-in Tones

8METRONOME
7PART
bkTEMPO
Turning on the Digital Piano
and Playing Something
1.

Press the (POWER) button.
This turns on power.
• To turn off the Digital Piano, press the
again.
Left Side
 button
2.
After a short while, the display screen should
appear as shown below, which indicates that
the Digital Piano is ready to be played.
3.
Use the  (VOLUME) controller to adjust the
volume level.
4.
Play something on the keyboard.
E-8
blMUSIC LIBRARY
 button
btw, q
bsFUNCTION csREVERB
brTONE
 – Tone groups

Selecting a Tone

Your Digital Piano has 250 tones, divided into eight
groups.
• For more information, see the "Tone List" (page
A-1).
• The Digital Piano has built-in demonstration tunes
that highlight the different characteristics of tones.
For more information, see "Playing Back All of the
Built-in Songs" (page E-23).
1.
Press the  (TONE) button so its upper lamp
is lit.
• Each press of the button toggles between the upper
and lower lamps.
IMPORTANT!
• Continuing on to the next step while the
REGISTRATION lamp is lit will perform a registration
recall operation (page E-32), which will change the
setup of the Digital Piano. Make sure that the TONE
lamp is lit before you advance to the next step.
2.
Use the "Tone List" (page A-1) to look up the
group and the number of the tone you want to
select.
ctCHORUS, u
dkSPLIT, i
dlENTER
Lit
B