Table of Contents
Advertisement
Receive Receipt of this message first stores the Source Note Number for the next note. When the next
Note On is received, the portamento effect is applied to the note using this Source Note Number as the
pitch start point and the Note On event key number as the end point. If there already is a note being
sounded by Source Note Number at this time, the new note on is not performed and the portamento
effect is applied to the pitch of the note being sounded. That is to say that legato play is performed.
8.17
Reverb Send Level (5BH)
Message Format:
BnH 5BH vvH
n:
MIDI Channel Number
vv:
Value
Receive Receipt changes the reverb send of the corresponding part.
8.18
RPN (Registered Parameter Number) LSB/MSB (64H,65H)
Message Format:
BnH 64H llH (LSB)
BnH 65H mmH (MSB)
n:
MIDI Channel Number
ll:
LSB Value
mm:
MSB Value
8.18.1
Pitch Bend Sensitivity
Message Format:
BnH 64H 00H
BnH 65H 00H
BnH 06H mmH
BnH 26H llH
n:
MIDI Channel Number
mm:
MSB Value(00H - 0CH)
ll:
LSB Value(Send:00H, Receive:Ignored)
Receive Receipt changes Bend Range of the corresponding part.
8.18.2
Channel Fine Tuning
Message Format:
BnH 64H 01H
BnH 65H 00H
BnH 06H mmH
BnH 26H llH
n:
MIDI Channel Number
mm:
MSB Value
ll:
LSB Value
Receive Receipt changes the fine tune of the corresponding part.
11
Advertisement
Table of Contents
