Casio Celviano 6ES1A User Manual page 60

Assembling the Stand
Unpacking
PREPARATION
• This stand does not include any of the tools required
for assembly. It is up to you to prepare a large
Philips head (+) screwdriver for assembly.
A
B
Part Qty
 4

6
 1

2

2
 4
 2

1
 1
IMPORTANT!
• If anything is missing or damaged, contact your local
CASIO service provider.
• Do not use any screws other than those that come
with the stand. Doing so risks damage to the stand
and/or the Digital Piano.
E-56
C
D
N
*
CAUTION
• Assembly of the stand should be performed by
at least two people working together.
• This stand should be assembled on a flat
surface.
• Do not remove the tape securing the keyboard
cover in place until assembly is complete.
Removing the tape can cause the keyboard
cover to open and close during assembly,
creating the risk of personal injury to your hands
and fingers.
• Take care that you do not pinch your fingers
between parts when assembling them.
To assemble the stand
1.
Unfasten the band
cable to the back of the crosspiece
pull the pedal cord out from the crosspiece.
1
Pedal cable
2.
Attach the side panels

crosspiece . Secure the side panels using

the four screws
• When installing part
slots in either end crosspiece
not inserted into the ends of the crosspiece
as they will go, the screws
into the screw holes of the brackets
strip the threads of the screws.
• Cover the screw heads with the caps
J
A
E
3
2

that bundles the pedal

and
 and  to the
.
 , slide the brackets  into the
 . If the brackets 
 as far
 will not be able to enter
 , which can
 .
J
D
E
are
B