Splitting The Keyboard Between Two Tones - Casio Celviano 6ES1A User Manual

Using Built-in Tones
Splitting the Keyboard
between Two Tones
You can split the keyboard so the left side (lower
range) plays one tone and the right side (upper range)
plays a different tone.
Example: To split the keyboard between the GM SLAP
BASS 1 tone on the left (lower range) and the
GRAND PIANO tone on the right (upper range).
Left (Lower Range)
Tone: GM SLAP BASS 1
1.

Press the (SPLIT) button.
This causes the SPLIT lamp to light, indicating that the
keyboard is split between two tones.
2.
Select the tone you want to assign to the left
side (lower range) of the keyboard.
Example: To select GM SLAP BASS 1 in the VARIOUS/
GM TONES group, press the
GM TONES) button and then use the
q) buttons to select "073 GM SlapBass1".
Left tone number
3.
To unsplit the keyboard and return it to a
single tone, press the
The SPLIT lamp will go out, indicating that the
keyboard is no longer split.
NOTE
• If the keyboard is set up with layered tones (page
E-9) when you perform the above split operation,
the layered tones will play on the right (upper
range) side of the keyboard.
E-10
Right (Upper Range)
Tone: GRAND PIANO
Lit
 (VARIOUS/
 (w,
Lit
Left tone name

(SPLIT) button.
Moving the Keyboard Split Point
You can use the procedure below to specify the
location on the keyboard where it splits between the
left side and the right side. That location is called the
"split point".
Left (Lower Range) side
1.

Hold down the
split point setting screen appears on the
display as shown below.
2.
Press the keyboard key where you want to
specify as the leftmost key of the right (upper
range) tone.
This specifies the split point.
3.

Press the (SPLIT) button.
This exits the split point screen.
Right (Upper Range) side
Split point
(SPLIT) button until the
Current split point key name