Slideshow Start Error; Using Viewer To Play A Movie - Casio XJ-S36 Function Manual

Slideshow Start Error

The error message shown below may appear when you attempt to start a slideshow using
one of the procedures under "To start a slideshow from a particular image file" (
"To perform a slideshow by running a presentation file" (
from the currently displayed image file content" (
There is a problem with the slideshow setup file. Cannot start the slideshow.
If this happens, use EZ-Converter 1.1 to create a new presentation file and store it on the
USB memory device or memory card. Next, use the new presentation file to run the
slideshow.

Using Viewer to Play a Movie

This section explains procedures you can use to play a movie using Viewer.
Note
For details about movie files whose playback is supported, see "Supported Playback
Data Types" (page 14).
To play a movie file
1
On the file menu, select the movie file you want to play.
For information about how to select a particular file on the file menu, see "To select a
file or a folder" (page 32).
2
Press the [ENTER] key.
This will start playback of the selected movie file.
If the movie includes audio of a format that is supported by the Data Projector, the
audio will be played back with the video.
3
To stop movie playback and return to the file menu, press the [ESC] key.
Note
Pressing the [ENTER] key while a file whose playback is not supported by the Data
Projector is selected will cause the error message "This movie file cannot be played
back." to appear.
To output audio to an external speaker, use commercially available audio cable to
connect the speaker to the AV terminal of the Data Projector. On the "Option Settings
2" of the "Setup" menu, select "Line" for the "USB Audio Out" setting.
Never connect earphones or headphones to the Data Projector AV terminal.
36), or "To start a slideshow
page
37).
page
39
33),
page