Error Indicators And Messages; Error Messages - Casio CX-E1 User Manual

Note
 The POWER/STANDBY indicator will flash green if the projector is turned on but the projection
light has been turned off by Auto Projection Off (page 62).

Error Indicators and Messages

Important!
 If you turn off power or if power turns off automatically after an error occurs, first confirm that
the projector's fan is stopped. After the fan stops, unplug the power cord and disconnect the
AC adapter (or battery). An error will not be cleared if you unplug the power cord and
disconnect the AC adapter (or battery) while the fan is running.

Error Messages

Error Messages
Internal temperature is too
high. Check projector air
vents for blockage.
(POWER/STANDBY
indicator lights green.)
Internal temperature is too
high. The projector will turn
off.
(POWER/STANDBY
indicator light changes
from green to red.)
The projector's internal temperature is very high. Perform the following steps.
 Check for any blocking of the projector's intake vents and exhaust vents, and
make sure that there is sufficient space around the projector. See "Setup
Precautions" (page 38).
 If there is dust accumulated around the intake vents and/or exhaust vents, turn off
the projector and remove it. See "Cleaning the Projector" (page 68).
Power has turned off automatically due to internal overheating. Perform the following
steps.
 Check for any blocking of the projector's intake vents and exhaust vents, and
make sure that there is sufficient space around the projector. See "Setup
Precautions" (page 38).
 If there is dust accumulated around the intake vents and/or exhaust vents, remove
it. See "Cleaning the Projector" (page 68).
If there is no problem with the projector's vents, confirm that the POWER/STANDBY
indicator is lit red (without flashing), and then turn power back on again. If the error
occurs again when you turn power back on, contact your retailer or nearest
authorized CASIO Service Center.
Description and Required Action
70