Casio XJ-S36 Function Manual page 33

To open a folder
1
Use the cursor keys to select the file you want to open.
2
Press the [ENTER] key.
This opens the selected folder and displays a menu of its contents.
With the tree view, you could also press the [ ] key instead of the [ENTER] key.
To close the current folder and move up to the next level
Thumbnail View
Press the [ESC] key.
Tree View
Press the [ESC] key or the [ ] key. This will collapse the folder where the highlighting is
currently located and move the highlighting to the next higher level.
To select a file menu item and display its image
1
Use the cursor keys to select the file whose image you want to display.
2
Press the [ENTER] key.
This will display a full-size version of the image that fills the projection area.
3
To return to the file menu, press the [ESC] key.
Note
If the selected file is too large to fit within the projection area, the message "Cannot
display an image file." will appear.
For information about operations you can perform while the image of a file is being
projected, see "Operations during Image File Content Projection" (
To start a slideshow from a particular image file
1
Use the cursor keys to select the file whose image from which you want to
start the slideshow.
2
Press the [ ] key.
This will display a full-size version of the image that fills the projection area. Now the
Data Projector will advance to the next image automatically at a regular interval (default:
5 seconds).
If "Manual" is selected for the "Image Switching" setting, the image will not change
automatically. In this case, press the [ ] key to advance to the next image.
3
To stop the slideshow and return to the file menu, press the [ESC] key.
33
37).
page