Installing Data Projector Software
Use the procedures in this section to install the software that comes bundled with the
Data Projector onto your computer.
When you want to do this:
Convert a PowerPoint file, PDF file, Web page, or other data to an
image file that can be projected from the projector, and store it on a
USB memory device or memory card
Convert PowerPoint files to image files, arrange the sequence of
image files, and store data to a USB memory device or memory
card
Convert image files to monochrome negatives for projection onto a
blackboard
Minimum System Requirements
The following describes minimum computer system requirements to run the bundled
software.
• Operating System: Microsoft
• Computer: IBM PC/AT or compatible that conforms to the following conditions.
• Windows Vista™, Windows
• PowerPoint 2000, 2002, 2003, or 2007 installed (to use EZ-Converter 1.1)
• CPU: Pentium III or higher
• Memory: 256MB minimum or amount of memory recommended for operating system
being run
• Hard Disk: At least 40MB for installation or at least 60MB when running
• Display: Full-color display with resolution of at least 800 × 600 that is supported by
above operating systems and the computer being used.
• Input Device: Keyboard or other pointing device (mouse supported above operating
system or equivalent device)
• Normal operation may not be possible under certain hardware configurations.
• Operation is not supported on a computer running Windows
3.1, or on a Macintosh or Mac OS computer.
• Operation on a computer upgraded to Windows Vista™, Windows
Professional from another operating system is not supported.
• Operation is not supported under Windows Vista™ 64-bit version.
• Operation on a computer running Windows
supported.
®
Windows Vista™, Windows
®
XP, or 2000 Professional pre-installed
®
XP Professional x64 Edition is not
10
Install this software:
EZ-Converter PRO
EZ-Converter 1.1
®
XP, or 2000 Professional
®
NT, Me, 98SE, 98, 95, or
®
XP, or 2000