About The Data Projector's Usb Functions - Casio XJ-M255 Function Manual

About the Data Projector's USB Functions

The USB port built into the Data Projector lets you connect an external USB device and use it as an
input source for image projection.
USB Memory Device or Memory Card
After you connect a memory device to the Data Projector's USB port, you can playback (project) the
following types of files.
ECA files (special projector presentation files)
The EZ-Converter FA software that comes with the Data Projector can be used to convert
PowerPoint files to ECA (.ECA) files for playback.
Note that unconverted PowerPoint files cannot be played back.
PtG file (MobiShow presentation file)
PtG is a presentation file format that is compatible with AWIND's MobiShow. Your Data Projector
supports playback of PtG files, only if they have been converted using EZ-Converter FA software.
Image files
Playback is supported for JPEG (jpg, jpeg, jpe; excluding progressive format) format or BMP (bmp)
format image files up to about 8 MB in size.
Movie files
Playback is supported for the following types of movie files, up to a maximum file size of
approximately 4GB.
• Motion JPEG format (.avi)
• Maximum Data rate: 15 Mbps • Maximum frame rate: 24 fps for 1280 × 720,
• Audio Format: ADPCM
Refer to the following for details.
For more information about this:
Converting PowerPoint files to files that can be
played back with the Data Projector
Memory devices that can be connected to the
Data Projector's USB port
Operations for projecting the contents of files
on a memory device
B
• Resolution: 1280 × 720, 640 × 480, 320 × 240
Refer to this section of this manual:
"Using EZ-Converter FA to Convert PowerPoint Files to ECA or
PtG Files" (page 12)
"Connecting a Memory Device to the Data Projector" (page 19)
"Using Viewer to Project the Contents of a File on a Memory
Device" (page 19)
5
30fps for 640 × 480 and 320 × 240
ECA/
AVI
PtG
USB memory device
JPEG