Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Shade N' Shelters Manuals
  4. Outdoor Furnishing
  5. SUM-GAZ-2
  6. Owner's manual

Shade N' Shelters SUM-GAZ-2 Owner's Manual

Summerdale 9' x 11' soft top gazebo
Hide thumbs
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual
Owner's Manual
Summerdale
9' x 11' Soft Top Gazebo
Model Number: SUM-GAZ-2
Scan For Video
Assembly Instructions!
Note: This gazebo frame is designed to be used as a permanent fixture. Remove canopy when not
in use or during high winds, rain or snow.
1 of 9

Advertisement

loading
Need help?

Need help?

Do you have a question about the SUM-GAZ-2 and is the answer not in the manual?

Questions and answers

Related Manuals for Shade N' Shelters SUM-GAZ-2

Summary of Contents for Shade N' Shelters SUM-GAZ-2

  • Page 1 Owner’s Manual Summerdale 9’ x 11’ Soft Top Gazebo Model Number: SUM-GAZ-2 Scan For Video Assembly Instructions! Note: This gazebo frame is designed to be used as a permanent fixture. Remove canopy when not in use or during high winds, rain or snow.

  • Page 2: Parts List

    Parts List Summerdale 9’ x 11’ Soft Top Gazebo Letter Illustration Description Qty. Center Roof Connector Corner Roof Support-Long (86 1/2") Side Roof Support-Short (57") Side Roof Support-Medium (68") Short Cross-Beam (55 3/4")-Left Short Cross-Beam (55 3/4")-Right Long Cross-Beam (90 1/2") Base Plate Top Connector Plate with "U"...
  • Page 3 Letter Illustration Description Qty. Ground Stakes M6 x 30mm Bolt with Washer, Nut Plastic Nut Cap M6 x 15mm Bolt and Washer M6 x 15mm Screw Roof Vent Canopy Main Canopy Mosquito Netting Ring Connectors Open Wrench Allen Wrench 3 of 9...
  • Page 4 Assembly Instructions Summerdale 9’ x 11’ Soft Top Gazebo Note: For video instructions please visit: https://shadenshelters.com/9x11-summerdale-gazebo Important: Read all the instructions before assembly. Failure to do so may result in faulty assembly and ⚫ potential injury. ⚫ Before assembling the product, remove all protective materials, hardware kit(s), and identify all parts packed in the carton are present.
  • Page 5 I. Cross-Beam Assembly: Step 1: Attach the Short Cross Beam (E1) to the Short Cross Beam (E2) using the Top Connector Plate (H) and Bottom Connector Plate (I) using Bolt, Washers and Nut (M). See Figure 1. Note: The round steel rail on the Cross-Beam is the top side. Figure 1 Step 2: Repeat for remaining Short Cross Beams (E1/E2).
  • Page 6 Step 2: Attach the Base Plates (G) to the Corner Post (J) using Bolts and Washers (N). See Figure 4. Figure 4 Step 3: Attach the 2 Assembled Short Cross-Beams (E1 and E2) and Long Cross-Beams (F) to the Corner Posts (J) with Bolt &...
  • Page 7 Step 2: Insert the “Push Button” end of the “Short” Roof Support (C) into the Center Roof Connector (A) and attach to the “U” Bracket (K) on top of the Assembled Cross-Beams (E1 and E2) using Bolt, Washers, and Nut (M). See Figure 8. Note: Roof Assembly requires a Step Ladder and help from a third person.
  • Page 8 V. Mosquito Netting Assembly: Step 1: Before attaching the Mosquito Netting (R), align all four sections on the ground next to the gazebo. Make sure the zippers are aligned in the center of each opening. The Fabric Tie-Backs sewn to the Mosquito Netting (R) also must be aligned with each Corner Post (J).

  • Page 9: Warranty

    Summerdale Gazebo Accessories Please visit https://shadenshelters.com to purchase ➢ Privacy Curtain ➢ Replacement Roof Canopy ➢ Replacement Mosquito Netting Care & Maintenance Maintain your gazebo by removing the canopies and storing out of the elements when not in use, or during hazardous weather conditions (wind, rain, snow, etc.).