fantastic furniture Java Manual page 7

Step 3
You will need
2 x Dowels 1 x Adjustable
ø8mm (H3) Foot (H20)
1 x crews
Mallet
38mm (H17)
Phillips Head
Screwdriver
Step 4
You will need
Flat Head
3 x Large Cam
Screwdriver
Nuts (H2)
Position the assembled middle legs (P8, P9)
onto the bottom panel
Insert 3 x large cam nuts (H2) into the assembled middle legs (P8, P9).
Rotate the cam nuts so the arrows point towards the incoming
cam bolts.
Using a flat head screwdriver turn clockwise to lock.
With assistance, turn the assembled frame over.
fantasticfurniture.com.au
Insert 2 x dowels (H3) into large middle leg (P8) and small middle
leg (P9). If needed use a mallet to gently tap the dowels into place.
Screw 1 x adjustable foot (H20) into large middle (P8).
Attach small middle leg (P9) to large middle leg (P8) with 1 x screw (H17),
using a phillips head screwdriver.
as shown.
Two People
Required
(P9)
H2
H2
H2
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
(P8)
(P5)
Page 7