Chapter 4 Using The Wireless Client Configuration Utility; Network Status - Rosewill RNX-G100, RNX-G200, RNX-G300 User Manual

RNX-G100 / RNX-G200 / RNX-G300(E)
To connect to one of the networks on the list, select the wireless network, and click
Associate button.

Chapter 4 Using the Wireless Client Configuration Utility

Use the Wireless Client Configuration Utility to check the link information, search for available
wireless networks, or create profiles that hold different configuration settings. You can
double-click the icon on your system desktop start it. Another way to start the Configuration
Utility is to click on Start>Programs>Wireless Client Configuration Utility>WirelessCfg.
If you are using Windows XP, you can use either the Zero Configuration Utility or the Wireless
Client Configuration

4.1 Network Status

The Network Status tab displays signal strength and link information, Internet Protocol (TCP/IP).
Figure 4-2
10
User Manual