RNX-G100 / RNX-G200 / RNX-G300(E) 1 . About This Guide This Quick Installation Guide only provides you some basic instructions. For more detailed information, please refer to the User Manual. Before you begin, you must have at least the following:...
Page 3
RNX-G100 / RNX-G200 / RNX-G300(E) Click Install Driver & Utility on the Wireless Client Configuration Utility screen Follow the Install Shield Wizard steps, and click Finish when done. Now the installation is complete Figure 2-2 Figure 2-3 User Manual...
RNX-G100 / RNX-G200 / RNX-G300(E) 3 . Install Wireless adapter Cardbus Adapter - RNX-G200 Power on your notebook, let the operating system boot up completely, and login as needed. Hold the adapter with the LOGO facing up and insert it into a Cardbus slot.
RNX-G100 / RNX-G200 / RNX-G300(E) PCI Adapter - RNX-G300(E) Open your PC case and locate an available PCI on the motherboard. Slide the PCI Adapter into the PCI slot. Make sure that all of its pins are touching the slot’s contacts.
Page 6
RNX-G100 / RNX-G200 / RNX-G300(E) User Manual Figure 4-1 Click the Site Survey tab then click the Refresh button to search for available wireless networks.
Page 7
Please read detail user manual and trouble shooting from the driver disk. Or contact support@rosewill.com Thank you for purchasing a quality Rosewill Product. Please register your product at : www.rosewill.com for complete warranty information and future support for your product. Figure 4-2 for more support.