Selectable Calling Tone; Selectable Paging Pre-Paging Tone Duration; Time-Out Of Conversation; Time-Out Of Paging Call - Toa EXES-6000 CP-66 Functions And Operating Instructions

Table of Contents

Advertisement

Selectable Calling Tone

The duration of the calling tone can be set for either 0.2
second (single note tone) or 0.3 second (warble tone).
It is also possible to have the station without any calling
tone.
Note.
1. The duration of the continuous calling tone is im-
possible to change.
2. It is impossible to use different calling tone modes
in one same system.

Selectable Paging Pre-paging Tone Duration

Paging pre-paging tone can be chosen from "2 seconds",
"1 second" and nothing.

Time-Out of Conversation

It is possible to limit the conversation duration to one
through ninty-nine minutes in the unit of one minute in
order to improve speech path availability. A hurry-up
tone is sounded in both the calling and called stations
approximately 10 seconds before the busy stations are
automatically disconnected from the speech path.

Time-Out of Paging Call

This function is employed to prevent the unnecessary
line occupation as a result of a paging party's failure to
depress the
key after a paging call establishment. The
paging call is automatically cancelled after a certain
period of time, which may be set at one through ninty-
nine minutes in the unit of one minute, with a hurry-up
tone transmitted to the paging station approximately 10
seconds prior to the automatic disconnection. When the
paged party responds, the conversation is automatically
cut off after the duration set by the Time-out of con-
versation function.
All manuals and user guides at all-guides.com
—54—

Advertisement

Table of Contents
loading

Table of Contents