Conversation Partner Indication [Lamp Type] - Toa EXES-6000 CP-66 Functions And Operating Instructions

< Response to indicated calling party >
If, during the conversation, the called party wishes
to respond the calling party indicated on the panel,
he can do so by pressing either
1.
versation is terminated), or
2 (calling party's No.) (the conversation
is placed on hold temporarily).
Conversation Partner Indication (Lamp Type)
A one station/one lamp type Conversation Partner indica-
tion panel can be provided for specific stations (eight
stations or eight groups of stations). The system can be
divided into max. 8 groups of stations (consecutive station
numbers) so that each group may have the Conversation
Partner Indication panels which are common within the
group. The party making the call and the party receiving
the call are indicated whenever the calls are made to and
made from any station in the group.
1. When a station having the Indication Panel makes a
call, a lamp of the called station lights on until the
conversation is cancelled.
2. When a station having the Indication Panel receives
a call, a lamp of the calling station lights on until the
conversation is cancel led.
Note.
The waiting station making a call to the station
(Camp-on-busy, privacy on) is not displayed on the
Indication Panel.
Group assignment for this function should be equal
to ''Conversation Partner Indication" group assign-
ment.
Indication panel should be used with the Data Trans-
mitting and Receiving Units.
All manuals and user guides at all-guides.com
(calling party's No.) (the con-
Indication panel at station No. 239
No.201
Indication panel at station No. 239
No.201
Conversation
—94—
Tie-line
No.208
Responding to a selected
calling party
Conversation
(Station No. 201 is disconnected)
(Station No.201 is hold)
Tie-line
No.239
No.239