Selectable First Station Number; Programmable Station Numbering - Toa EXES-6000 CP-66 Functions And Operating Instructions

Selectable First Station Number

The first station number of the system may be selected
from any of the following
station number): 100/200/300/400/500/600/700/
800/900.
The system with Personal Numbers can't use No.
100 ~ 199.

Programmable Station Numbering

This function allows the system to have "Programmable
station numbers'', other than the "Hardwired station
numbers" by programming.
The unprogrammed stations are used as original
hardwired station numbers.
Type of dial operation
With Personal number
Without Personal number
1. Numbering schedules can be changed easily by pro-
gramming in stead of rewiring.
2. Such numbering schedules as 200's, 300's and 900's
can be grouped together for each individual office.
3. Hardwired stations of each paging zone must have
consecutive numbers.
station numbers inconsecutive, use this function.
4. This function requires No.200 programming. See Installa-
tion Instructions for EXES-6000 CP unit.
Dialing
5. People operating the intercom stations need not worry
about the Hardwired station numbers. Note, however,
that the hardwired station numbers are used to program
all the setup data of each function into the exchange
through No.200 programming.
All manuals and user guides at all-guides.com
numbers (Hardwired
Programmable
Hardwired
station number station number
No.200 ~ 999
No.200 ~ 455
No.100 ~ 999
No.100 ~ 355
To make the programmable
Exchange
Circuit No. 201
(Hardwired station
number)
Circuit No. 203
(Hardwired station
Note.
Station No. 200 programming is required when any
other numbering schedules than standard (No. 200 ~)
are used.
< Example >
Programmable station
No. 203
number)
Programmable station
No. 201
—51—
Programmable
Hardwired
station number
station number
Programmable
Hardwired
station number
station number
Programmable
Hardwired
station number station number
Department 1
Department 2
Station
paging zone