Related Manuals for Toa EXES-6000 CP-66
Summary of Contents for Toa EXES-6000 CP-66
- Page 1 All manuals and user guides at all-guides.com EXES-6OOO CP-66 INTERCOM SYSTEM CP-66 Functions and Operating Instructions TOA Corporation...
-
Page 2: Table Of Contents
(HF-250M) ........5. Functions: EXES-6000 CP-66 .... - Page 3 Paging Call ......EXES-6000 CP-66 Summary of Dial Operations All-Call Paging and Individual Zone Paging ..
-
Page 4: Instructions" For Stations For Exes-6000
All manuals and user guides at all-guides.com Introduction to the "Functions and Operating Instructions" for stations for EXES-6000 "PV" Type and "NP" Type This handbook explains the functions and operating procedures of stations for TOA's EXES-6000 Intercom System. Type Definition... - Page 5 All manuals and user guides at all-guides.com Chapter 1 Basic functions, their operating procedures and all functions...
-
Page 6: Stations
All manuals and user guides at all-guides.com 1. Stations (1) HF-200M/HF-200MB (7) HF-640S Desk/surface-mounted handsfree/handset master station Door station (8) HF-670M/HS-670 HF-670M (2) HF-210M/HF-210MB Industrial-use handsfree Desk/surface-mounted handsfree master station master station HS-670 (3) TL-600M Handset unit for HF-670M Desk/surface-mounted handset operated master station (9) HF-250M Desk/surface-mounted handsfree/handset master station (4) TL-600S... -
Page 7: Speech Functions
All manuals and user guides at all-guides.com 2. Speech functions Either "PV" Type (the system with Privacy function) or "NP" Type (without Privacy function) mode should be selected for the whole intercom system. When Privacy Switch (SW) of station is turned ON, privacy tone is available in "PV"Type system, while continuous calling tone is available in "NP"... -
Page 8: Station Operation (Pv Type)
All manuals and user guides at all-guides.com 3. Station Operation (PV Type) PV Type Model TL-600M/610M/620M 1) Handset Master Station Handset Speaker volume switch Dial keys In-use lamp TL-600M Handset Cord Loudspeaker In-use lamp Keyboard TL-620M TL-610M < Making a call > 5. -
Page 9: Hands-Free Master Station
All manuals and user guides at all-guides.com PV Type 3) Hands-free Master Station Model HF-210M/210MB/670M/HS-670 Speaker In-use lamp Privacy switch Dial keys Speaker volume switch Microphone HS-670 HF-670M HF-210M < Making a call > < Responding to a call > 1. -
Page 10: Hands-Free Substation
All manuals and user guides at all-guides.com PV Type 4) Hands-free Substation Speaker In-use lamp Privacy switch Dial keys Speaker volume switch Microphone HF-210M+YC-200 HF-210M+YC-240S < Making a call > < Responding to a call > 1. Touching the key makes a call to the designated [Privacy switch is in the OFF.] station regardless of whether the Privacy switch on 7. - Page 11 All manuals and user guides at all-guides.com PV Type 5) Hands-free / Handset Master Station Model HF-200M/200MB/250M (With Auto-Dialer) Speaker Handset In-use lamp Privacy switch Speaker volume switch Microphone Dial keys HF-200M HF-250M < Making a call > < Responding to a call > 1.
-
Page 12: 6) Hands-Free / Handset Substation
All manuals and user guides at all-guides.com PV Type 6) Hands-free / Handset Substation Speaker Handset In-use lamp Privacy switch Speaker volume switch Microphone Dial keys HF-200M+YC-200 HF-200M+YC-230S < Making a call > < Responding to a call > [Privacy switch is in the OFF.] 1. - Page 13 All manuals and user guides at all-guides.com 7) Hands-free/Handset Master Station with Auto-Dialer Model HF-250M In-use lamp Liquid crystal display (LCD) Handset REGISTER switch Rear side Station number card Loud speaker Auto-Dialer keys Speaker volume switch < Making a call > <...
-
Page 14: Talk-Back Unit (Tk-20)
All manuals and user guides at all-guides.com PV Type 8) Door Substation Model HF-640S HF-640S < Making a call > Note. 1. Pressing a button calls the specified master station. 1. Making a call from the door station to the master station having its Privacy switch in ON transmits a brief calling 2. - Page 15 All manuals and user guides at all-guides.com 4. Station Operation (NP Type) NP Type Model TL-600M/610M/620M 1) Handset Master Station Handset Speaker volume switch Dial keys In-use lamp TL-600M Handset Retractile cord Loudspeaker In-use lamp Keyboard TL-620M TL-610M < Making a call > 1.
- Page 16 All manuals and user guides at all-guides.com NP Type 3) Hands-free Master Station Model HF-210M/210MB/670M/HS-670 Speaker In-use lamp Privacy switch Dial keys Speaker volume switch Microphone HS-670 HF-670M HF-210M < Making a call > < Responding to a call > 1.
- Page 17 All manuals and user guides at all-guides.com 4) Hands-free Substation NP Type Speaker In-use lamp Privacy switch Dial keys Speaker volume switch Microphone HF-210M+YC-240S HF-210M+YC-200 < Making a call > < Responding to a call > 1. Touching the key makes a call to the designated [Privacy switch is in the OFF.] other station whether the Privacy switch on your 7.
- Page 18 All manuals and user guides at all-guides.com NP Type 5) Hands-free / Handset Master Station Model HF-200M/200MB/250M (With Auto-Dialer) Speaker Handset In-use lamp Privacy switch Speaker volume switch Microphone HF-250M Dial keys HF-200M < Making a call > < Responding to a call > 1.
- Page 19 All manuals and user guides at all-guides.com NP Type 6) Hands-free / Handset substation Speaker Handset In-use lamp Privacy switch Speaker volume switch Microphone Dial keys HF-200M+YC-200 HF-200M+YC-230S < Making a call > < Responding to a call > 1. For hands-free conversation, touching the [Privacy switch is in the OFF.] makes a call to the designated other station regardless 9.
- Page 20 All manuals and user guides at all-guides.com NP Type 7) Hands-free/Handset Master Station with Auto-Dialer Model HF-250M Liquid crystal In-use lamp display (LCD) Handset REGISTER switch Rear side Station number card Loud speaker Auto-Dialer keys Speaker volume switch < Making a call > <...
- Page 21 All manuals and user guides at all-guides.com NP Type 8) Door Substation Model HF-640S HF-640S < Making a call > Note. 1. Pressing a button calls the specified master station. 1. Making a call from the door station to the master station having its Privacy switch in ON transmits a brief calling 2.
- Page 22 All manuals and user guides at all-guides.com Functions: EXES-6000 CP-66 Selectable Function Tie-line Standard Optional Single Classification Function By DIP By No. 200 Outside TI-600 Function Function Exchange Switch Programming Exchange Exchange Exchange Camp-On-Busy Busy call back Mic-Off Single Digit Dialing...
- Page 23 All manuals and user guides at all-guides.com Functions: EXES-6000 CP-66 Notes. 1. XX/YY indicates to select either XX (Function) or YY (Function). 2. Not all circles in The Switch Selection table correspond to the DIP switches of the CP unit.
-
Page 24: Chapter 2. Functions And Operating Procedures Of Single Exchange System
All manuals and user guides at all-guides.com Chapter 2 Functions and operating procedures of single exchange system... - Page 25 All manuals and user guides at all-guides.com EXES-6000 CP-66 — Summary of Dialing Operations (single exchange system) 1. Selecting dial operations The EXES-6000 Intercom system allows digit-dialing operations to be minimized depending on the number of stations and their functions. Four types of dialing operations (Type 1, Type 2, Type 3, and Type 4) are available. Select the most suitable type by changing the setting of the internal switch at the exchange.
- Page 26 All manuals and user guides at all-guides.com (Type 1) (Type 2) (Type 3) (Type 4) Three-digit dialing, Three-digit dialing, station number Two-digit dialing, Two-digit dialing, 60 stations standard type, 128 stations conversion, 256 stations full paging function, 60 stations (No. 20 through 99, No. 10 through 99) (No.
- Page 27 All manuals and user guides at all-guides.com (Type 1) (Type 2) (Type 3) (Type 4) Three-digit dialing, Three-digit dialing, station number Two-digit dial, Two-digit dialing, 60 stations standard type, 128 stations conversion, 256 stations (No. 200 through full paging function, 60 stations (No.
- Page 28 All manuals and user guides at all-guides.com (Type 2) (Type 3) (Type 1) (Type 4) Three-digit dialing, Three-digit dialing, station number Two-digit dialing, Two-digit dialing, 60 statins standard type, 128 stations conversion, 256 stations full paging function, 60 stations (No. 20 through 99, No. 10 through 99) (No.
-
Page 29: Camp-On-Busy
All manuals and user guides at all-guides.com Camp-On-Busy When the party you are calling is on another line, by simply waiting you automatically "Camp-On" the line. (Busy tone sounds continuously.) As soon as the line is freed, you will After call be automatically connected. -
Page 30: Privacy (Pv Type)
All manuals and user guides at all-guides.com Privacy PV Type Shift Privacy Switch to ON. One tone When a party does not wish to accept incoming calls, this function may be employed to refuse them. With the Privacy switch in the ON position, a continuous privacy tone will be sounded in the station making the call, and at the same time, a brief Privacy tone will sound in the station called, indicating a call attempt is being made. -
Page 31: Camp-On-Privacy (Pv Type)
All manuals and user guides at all-guides.com Camp-On Privacy PV Type When the party you are calling has his station on Privacy mode, by simply waiting you will automatically "Camp- On" the line. (Privacy tone sounds continuously.) As soon as the Privacy mode is released, or as soon as he one-touch dials any of the keys , or as soon as he picks up a handset of his station, you will be automati-... -
Page 32: Mic Off (Pv Type/Np Type)
All manuals and user guides at all-guides.com NP Type Mic Off Touch dialing of Call during a conversation turns off that station's microphone, and a holding tone is heard at both stations involved. Holding tone Holding tone This function is used when for one reason or another it is desirable to stop a conversation temporarily. -
Page 33: Single Digit Dialing
All manuals and user guides at all-guides.com Single Digit Dialing Single digit registration Register in advance as follows: Confirmation tone (Station number) Station number Confirmation tone (Personal number) Personal number Confirmation tone (Paging call) Paging zone Confirmation tone (All-call paging response) Confirmation tone (Each function) Any six digits... -
Page 34: Master Sub Relationship
All manuals and user guides at all-guides.com Master Sub Relationship Master/Substation associations are set up by using station #200 as the programming station. Once these relationships have been established, substations can then contact their Substation designated master stations by simply touch dialing If TL-600S Handset substation is used, it can be connected to its designated master stations by simply picking up a Master Station... -
Page 35: Personal Number Call
All manuals and user guides at all-guides.com Personal Number Call A personal number may be registered at any master station which the person to whom the number is assigned expects to be. A party wishing to receive personal number calls at a specific station may register his number at that station by Registration touch dialing... -
Page 36: Continuous Calling Tone
All manuals and user guides at all-guides.com Continuous Calling Tone When there is an incoming call to the specified station, a calling tone is sounded continuously at the called station. The continuous calling tone stops if the called party presses Continuous calling tone 1. -
Page 37: Remote Response
All manuals and user guides at all-guides.com Remote Response Dial operation for Remote response A call to a certain station can be remotely responded to from the other station by simply depressing while a continuous call tone is ringing or within 5 seconds after a Calling tone brief call tone has stopped ringing. - Page 38 All manuals and user guides at all-guides.com Call Transfer Call Transfer from Called Station Call During the conversation, first dial Called Station Calling Station (the Station Number of the person the call is to be trans- ferred to). Called Station The original call is then held and the holding tone is trans- mitted to the other party, while the third party is called and asked whether he will accept the call.
-
Page 39: Group Hunting
All manuals and user guides at all-guides.com Paging during Normal Calls This function allows a paging call to be made during the conversation to call the third party and ask him if he accepts the call, while holding the original conversation. Conversation The original call, if he accepts, is transferred to the third party. -
Page 40: Secretary Transfer (Pv Type/Np Type)
All manuals and user guides at all-guides.com Secretary Transfer This function is only available when a specified station is Executive programmed for this purpose with use of Station #200 in the programming mode. Automatic transfer of incoming calls by an executive to his secretary is accomplished by placing the Privacy Switch on his station in the ON position. - Page 41 All manuals and user guides at all-guides.com Secretary Transfer and Call Transfer PV Type Combination of the secretary transfer and call transfer allows rerouting of the call transferred to the secretary Executive back to the executive's station. When the secretary answering a call touch dials Secretary Other person Call...
- Page 42 All manuals and user guides at all-guides.com Secretary Transfer and Call Transfer NP Type Adoption of the selective function "Transfer" allows rerout- ing of the call transferred to the secretary back to the Executive executive's station. When the secretary answering a call touch dials Other person Secretary Call...
-
Page 43: Call Forwarding
All manuals and user guides at all-guides.com Call Forwarding When you will be away from your station and wish all Registration of Call Forwarding incoming calls to be rerouted to a different destination you are going to move to, you can do so by registering that station number before you leave. -
Page 44: Priority
All manuals and user guides at all-guides.com Priority When the party called is on the line, as indicated by the busy tone, dialing transmits a priority tone to the called party. The same tone is audible at the calling station. The call is connected if the called party also responds by dialing Busy Tone Priority... - Page 45 All manuals and user guides at all-guides.com Highest Executive Priority This function is available only for those stations specifically programmed for this function, with programming station No. 200. When the station called is busy, as indicated by the busy or privacy tone, dialing sends a priority tone.
-
Page 46: Conference
All manuals and user guides at all-guides.com Conference A "Hands-Free" conference call can be made with up to 4 persons. For a conference under this function the other A "Hands-Free" conference call can be made participants may be called either through their station num- with up to 4 persons. - Page 47 All manuals and user guides at all-guides.com Paging A variety of paging modes allows paging over a wide area 3. Responding to a paging call from any master station. The paged party may respond A. Automatic response from the nearest master station. 1.
- Page 48 All manuals and user guides at all-guides.com Other Paging Modes 1. Combination paging Note. Combination paging is used when several zones must be Dial operation of Combination paging paged simultaneously through External PA or Station Paging call paging. A special paging area can be created wherever the paging ranges overlap by combining several zones.
-
Page 49: How To Select The Paging Area And Make The Paging Call
All manuals and user guides at all-guides.com How to select the paging area and make the paging call. Paging functions may include both external PA and sta- tions, depending on the zone being used. The paging area is limited to individual zone, Combination paging and All-call paging depending on the call range. -
Page 50: All-Call Paging And Individual Zone Paging
All manuals and user guides at all-guides.com All-Call Paging and Individual Zone Paging Paging call External PA paging to a specific zone is possible from any master station by pressing ('0' or '00" = all-call) and the desired zone number ('0' = all-call). It is possible to wait for a response in this mode, but anything said will be broadcasted over the entire zone. -
Page 51: Combination Paging
All manuals and user guides at all-guides.com Combination Paging < Example 1 > Combination of individual zones Several zones can be called simultaneously using external Combination zone 91 Combination zone 92 PA paging and station paging. This is combination paging and is initiated by pressing Paging will be broadcast to predetermined zones. - Page 52 All manuals and user guides at all-guides.com < Example 4 > To use the combination paging, Programing must be estab- lished for each individual paging zone included in each combined zone. For further details, refer to Installation Hand Book for EXES-6000 CP unit.
-
Page 53: Emergency All-Call Paging
All manuals and user guides at all-guides.com Emergency All-Call Paging Handset substation TL-600S should normally be used for < Emergency all-call paging is made > the emergency all-call station, No. 247. To broadcast emergency all-call paging, pick up a handset. All-call The highest priority all-call paging can be broadcasted to all zones without a paging pre-announcement tone. -
Page 54: Priority Station Paging
All manuals and user guides at all-guides.com Priority Station Paging Normal station paging calls are not audible at the busy < Example 1 > stations, but the Priority Station Paging can break in on such busy stations. 1. Dial (zones: 1 ~ 7, all-call: 0), (zones: 01 ~ 31, all-call: 00), or (*01 ~15) (combination zones: 80 ~ 99). -
Page 55: Personal Number Paging
All manuals and user guides at all-guides.com Personal Number Paging If you wish to receive personal number paging call, register Registering a Personal Number your personal number at any station in the desired paging zone by dialing Any station in a Paging zone No. 3 (Example) Personal number A calling party can page you automatically in that zone if... -
Page 56: Selectable First Station Number
All manuals and user guides at all-guides.com Selectable First Station Number Note. The first station number of the system may be selected Station No. 200 programming is required when any from any of the following numbers (Hardwired other numbering schedules than standard (No. 200 ~) station number): 100/200/300/400/500/600/700/ are used. -
Page 57: Group Blocking
All manuals and user guides at all-guides.com Group Blocking < Example > Function (A) . . The system can be grouped or divided Group 1 No.201 ~ 209 into a maximum of 8 groups of stations Group 4 Group 3 Group 2 with sequential station numbers. -
Page 58: Programmable Restricted Access For Stations
All manuals and user guides at all-guides.com Programmable Restricted Access for Stations Stations at which the following 7 specified functions can be restricted. 1. All-call paging 2. Zone paging. 3. Conference Station number 4. General purpose control Mode 1 (One-shot make output) 5. -
Page 59: Selectable Calling Tone
All manuals and user guides at all-guides.com Selectable Calling Tone The duration of the calling tone can be set for either 0.2 second (single note tone) or 0.3 second (warble tone). It is also possible to have the station without any calling tone. -
Page 60: In/Out Annunciation
All manuals and user guides at all-guides.com In/Out Annunciation The in/out annunciation indicators can be turned on or In/out indication panel off from any master station by using the personal number . . . registering procedure. When a personal number registration is made at a station, Lamp on by dialing Confirmation tone... -
Page 61: Destination Annunciation Indication
All manuals and user guides at all-guides.com Destination Annunciation Indication When a personal number is registered at the station of the destination a person has moved to, the corresponding lamp The lamp on the Destination panel is turned on on the destination indication panel comes on, indicating where he is. -
Page 62: Calling Party Indication [Lamp Type]
All manuals and user guides at all-guides.com Calling Party Indication (Lamp Type) Indication panel at station No. 239 A one station/one lamp type calling party indication panel can be provided for certain specified stations (eight stations or eight groups of stations) The system can also be divided into a maximum of 8 groups of stations (consecutive station numbers) so that each group may have the calling party indication panels which... -
Page 63: Calling Party Indication [Numerical Type]
All manuals and user guides at all-guides.com Indication panel at station No. 239 <Response to indicated calling party> If, during the conversation, the called party wishes to respond the calling party indicated on the panel, he can do so by pressing either. (calling party's No.) (the conversa- tion is terminated) or (calling party's No.) (the conversation is... -
Page 64: Conversation Partner Indication [Lamp Type]
All manuals and user guides at all-guides.com Conversation Partner Indication (Lamp Type) A one station/one lamp type Conversation partner indica- Indication panel at station No. 239 tion panel can be provided for specific stations (eight stations or eight groups of stations). The system can be divided into max. -
Page 65: Pocket Pager
All manuals and user guides at all-guides.com Pocket Pager • Pager call and response The system can call a maximum of 10,000 pager receivers and the party called can answer the call via the nearest station. It is also possible to call those pager receivers having voice or display functions. -
Page 66: General Purpose Control
All manuals and user guides at all-guides.com General Purpose Control Station may be restricted from access to this function. This function can control other equipments by employing the Data Transmitting and Receiving Units. Select the required type of output. Door remote (Mode 1) One-shot make output (500/50 contacts) control... -
Page 67: Simplified Paging
All manuals and user guides at all-guides.com Simplified Paging If an external speaker is connected instead of a station, simplified paging can be made without the PA amplifier when the caller dials that station number and makes a paging call. Simplified paging Note. - Page 68 All manuals and user guides at all-guides.com Chapter 3 Functions and operating procedures of tie-line system...
- Page 69 All manuals and user guides at all-guides.com Tie-line Connections of Exchanges Tie-line 1. Purpose of tie-line connection The EXES-6000 system incorporating the CP-66 central processing unit permits the use of a single exchange as well as the tie-line connection of 2 or 3 exchanges. The tie-line connection is used when 1) connecting 2 or 3 exchanges installed in locations which are remote from each other (Maximum...
- Page 70 All manuals and user guides at all-guides.com 3. Numbering Schedule for Stations and Paging Zones Standard schedule (when personal Nos. are provided) Numbering for stations Numbering for paging zones Type of exchange System Paging zones/exchange Without paging With paging All station calls Zones EX-610 200~263...
- Page 71 All manuals and user guides at all-guides.com Restricted Conditions for Tie-line Connection Tie-line 1. Paging 4. Below are functions that can be operated for the same 1) Paging is possible for up to 15 zones per exchange. exchange but cannot be operated extending over more 2) The whole area of all exchanges can be called by all- than one exchange connected by tie-line.
-
Page 72: Exes-6000 Cp-66 Summary Of Dial Operations 19) (For Tie-Line System)
All manuals and user guides at all-guides.com EXES-6000, CP-66 Summary of Dial Operations (For Tie-Line System) Tie-line Function Dialing operation Number assignment Press-to-talk Remote response Remote response registration Answering continuous calling tone Privacy Secretary transfer Single-digit registration Single-digit dialing Personal number registration In/out indicator lamp ON Personal number cancellation In/out indicator lamp OFF... - Page 73 All manuals and user guides at all-guides.com Tie-line Function Dialing operation Number assignment One-shot, relay-make output Relay make-break output 8-selectable, one-shot, relay make output 8-selectable output (Decimal output) 4-digit decimal output Pager call Pager response Calling station selection Message recording Message check Message playback Message cancellation...
-
Page 74: Camp-On-Busy
All manuals and user guides at all-guides.com Camp-On-Busy When the party you are calling is on another line, by simply waiting you automatically "Camp-On" the line. (Busy tone sounds continuously.) As soon as the line is freed, you will After call be automatically connected. -
Page 75: Privacy (Pv Type)
All manuals and user guides at all-guides.com Privacy Tie-line PV Type Shift Privacy Switch to ON. One tone When a party does not wish to accept incoming calls, this function may be employed to refuse them. With the Privacy switch in the ON position, a continuous privacy tone will be sounded in the station making the call, and at the same time, a brief Privacy tone will sound in the station called, indicating a call attempt is being made. -
Page 76: Camp-On-Privacy (Pv Type)
All manuals and user guides at all-guides.com Camp-On Privacy Tie-line PV Type When the party you are calling has his station on Privacy mode, by simply waiting you will automatically "Camp- On" the line. (Privacy tone sounds continuously.) As soon as the Privacy mode is released, or as soon as he one-touch dials any of the keys ( ), or as soon as... -
Page 77: Single Digit Dialing
All manuals and user guides at all-guides.com Single Digit Dialing Tie-line Single digit registration Register in advance as follows: Confirmation tone (Station number) Station number Confirmation tone (Personal number) Personal number Confirmation tone (Paging call) Paging zone Confirmation tone (All-call paging response) Confirmation tone (Each function) Any six digits... -
Page 78: Master Sub Relationship
All manuals and user guides at all-guides.com Master Sub Relationship Tie-line Master/Substation associations are set up by using station #200 as the programming station. Once these relationships have been established, substations can then contact their Substation designated master stations by simply touch dialing If TL-600S Handset substation is used, it can be connected to its designated master station by simply picking up a Master Station... -
Page 79: Personal Number Call
All manuals and user guides at all-guides.com Personal Number Call A personal number may be registered at any master station which the person to whom the number is assigned expects to be. A party wishing to receive personal number calls at a specific station may register his number at that station by Registration touch dialing... -
Page 80: Continuous Calling Tone
All manuals and user guides at all-guides.com Continuous Calling Tone Tie-line When there is an incoming call to the specified station, a calling tone is sounded continuously at the called station. The continuous calling tone stops if the called party presses Continuous calling tone (except key) -
Page 81: Remote Response
All manuals and user guides at all-guides.com Remote Response Tie-line Dial operation for Remote response A call to a certain station can be remotely responded to from the other station by simply depressing while a continuous call tone is ringing or within 5 seconds after a Calling tone brief call tone has stopped ringing. - Page 82 All manuals and user guides at all-guides.com Call Transfer Tie-line Call Transfer from Called Station Call During the conversation, first dial Called Station Calling Station (the Station Number of the person the call is to be trans- ferred to). Called Station The original call is then held and the holding tone is trans- mitted to the other party, while the third party is called and asked whether he will accept the call.
-
Page 83: Group Hunting
All manuals and user guides at all-guides.com Paging during Normal Calls Tie-line A paging call can be made by a called party of an existing call to a third party, the third party's response accepted while the original call is on hold, and the original call Conversation resumed when the response call has ended. -
Page 84: Secretary Transfer (Pv Type/Np Type)
All manuals and user guides at all-guides.com Secretary Transfer Tie-line This function is only available when a specified station is Executive programmed for this purpose with use of Station #200 in the programming mode. Automatic transfer of incoming calls by an executive to his secretary is accomplished by placing the Privacy Switch on his station in the ON position. - Page 85 All manuals and user guides at all-guides.com Secretary Transfer and Call Transfer Tie-line PV Type Combination of the secretary transfer and call transfer allows rerouting of the call transferred to the secretary back to the executive's station. When the secretary answering a call touch dials Call Executive's station number Secretary dials...
- Page 86 All manuals and user guides at all-guides.com Secretary Transfer and Call Transfer NP Type Tie-line Adoption of the selective function "Transfer" allows rerout- ing of the call transferred to the secretary back to the executive's station. When the secretary answering a call touch dials Call Executive's station number Secretary dials...
-
Page 87: Highest Executive Priority
All manuals and user guides at all-guides.com Highest Executive Priority Tie-line This function is available only for those stations specifically programmed for this function, with programming station No. 200. When the station called is busy, as indicated by the busy or privacy tone, dialing sends a priority tone. -
Page 88: Conference
All manuals and user guides at all-guides.com Conference Tie-line A "Hands-Free" conference call can be made with up to 4 persons. For a conference under this function the other A "Hands-Free" conference call can be made participants may be called either through their station num- with up to 4 persons. - Page 89 All manuals and user guides at all-guides.com Paging Tie-line A variety of paging modes allows paging over a wide area C. Maximum paging zones from any master station. The paged party may respond No. of from the nearest master station. Public address Kind of Exchanger Station paging...
- Page 90 All manuals and user guides at all-guides.com How to select the paging area and make the paging call Tie-line If the EX-630 Dialing operation is included in the tie-line exchanges. Response Paging area Paging call Automatic Zone number response dialing All-call paging over the entire zones of exchanges "A", "B"and "C"...
-
Page 91: Paging
All manuals and user guides at all-guides.com All-Call Paging and Individual Zone Paging Tie-line Paging call External PA paging to a specific zone is possible from any master station by pressing after picking up a handset. ("00" = all-call) (01 ~ 45) (*01 ~ 21) It is possible to wait for a response in this mode, but any- thing said will be broadcasted over the entire zone. - Page 92 All manuals and user guides at all-guides.com Selectable First Station Number of Each Exchange Tie-line 1. Standard station Numbering schedules of exchanges A, B and C are as follows: < Standard station numbering > Type of Exchange With Personal 200 ~ 455 470 ~ 725 740 ~ 995 Number (Standard)
-
Page 93: Programmable Station Numbering
All manuals and user guides at all-guides.com Programmable Station Numbering Tie-line 1. This function allows the system to have "Programmable station numbers", other than the "Hardwired station numbers" by programming. The stations not registered for "Programmable Station Numbers" remain in the original "Hardwired Station Number". -
Page 94: Group Blocking
All manuals and user guides at all-guides.com Group Blocking Tie-line Funtion (A) The system can be grouped or divided into a maximum of 6 groups of stations with consecutive station numbers by exchanges "A", "B" and "C". Different station groups cannot call each another. [Example 1] <... - Page 95 All manuals and user guides at all-guides.com Example of Group Blocking registration Tie-line To use this function, station No. 200 programming (No.470 programming or No.740 programming) of the allocated station number, group, paging zone, etc., must be set up in the exchange.
-
Page 96: Programmable Restricted Access For Stations
All manuals and user guides at all-guides.com Programmable Restricted Access for Stations Tie-line Stations at which the following 7 specified functions can be restricted. 1. All-call paging 2. Zone paging 3. Conference Station number 4. General purpose control Mode 1 (One-shot make output) 00~49 000 ~ 499 5. -
Page 97: Selectable Calling Tone
All manuals and user guides at all-guides.com Selectable Calling Tone Tie-line The duration of the calling tone can be set for either 0.2 second (single note tone) or 0.3 second (warble tone). It is also possible to have the station without any calling tone. -
Page 98: In/Out Annunciation
All manuals and user guides at all-guides.com In/Out Annunciation Tie-line The in/out annunciation indicators can be turned on or In/out indication panel off from any master station by using the personal number registering procedure. When a personal number registration is made at a station, Lamp on by dialing Confirmation tone... -
Page 99: Calling Party Indication [Lamp Type]
All manuals and user guides at all-guides.com Tie-line Calling Party Indication (Lamp Type) Indication panel at station No. 239 A one station/one lamp type calling party indication panel can be provided for certain specified stations (eight stations or eight groups of stations) The system can also be divided into a maximum of 8 groups of stations (consecutive station numbers) so that each group may have the calling party indication panels which... -
Page 100: Conversation Partner Indication [Lamp Type]
All manuals and user guides at all-guides.com Tie-line Indication panel at station No. 239 < Response to indicated calling party > If, during the conversation, the called party wishes to respond the calling party indicated on the panel, he can do so by pressing either (calling party's No.) (the con- versation is terminated), or (calling party's No.) (the conversation... -
Page 101: Pocket Pager
All manuals and user guides at all-guides.com Pocket Pager Tie-line • Pager call and response The system can call a maximum of 10,000 pager receivers and the party called can answer the call via the nearest station. It is also possible to call those pager receivers having voice or display functions. -
Page 102: General Purpose Control
All manuals and user guides at all-guides.com General Purpose Control Station may be restricted from access to this function. This function can control other equipments by employing the Data Transmitting and Receiving Units. Select the required type of output. Door remote (Mode 1) One-shot make output (500/50 contacts) control... - Page 103 All manuals and user guides at all-guides.com Tie-line Note. When 2 or 3 exchanges are connected by tie-lines, Data Transmitting and Receiving Units can be operated from the stations which share the same exchange but their operation is impossible from the stations which are con- nected to the other exchange.
-
Page 104: Simplified Paging
All manuals and user guides at all-guides.com Simplified Paging Tie-line If an external speaker is connected instead of a station, simplified paging can be made without the PA amplifier when the caller dials that station number and makes a paging call. Simplified paging Note. - Page 105 All manuals and user guides at all-guides.com Chapter 4 Functions and Operating Procedures of External Interface System...
- Page 106 All manuals and user guides at all-guides.com External interfaces 1. Types of external interfaces (2) LD interface This interface, when connected to the internal PBX External interfaces are classified into four types: OD via the EXES-6000 exchange, permits normal calls, interface, LD interface, CB interface, and Tie-line inter- paging calls, etc.
- Page 107 All manuals and user guides at all-guides.com OD interface 1. Calls from the intercom station to the PBX extension telephone Ring, ring, ring First dial (OD interface access No.). After confirm- ing a dial tone from the PBX, dial (extension No.).
- Page 108 All manuals and user guides at all-guides.com CB interface 1. Making outgoing telephone calls from the intercom station (1) If the CB-600 is connected to PBX extension lines. Dial (CB interface access No.). After confirm- ing a dial tone from the PBX, dial (dialing for external calling) to gain access to the telephone line.
- Page 109 All manuals and user guides at all-guides.com (2) One of the CB-600 lines can be used to call a city City pager No. pager. (For details of the registration procedure, refer to the function code 28 of No.200 program- ming.) Specified No.
-
Page 110: Tie-Line Interface
All manuals and user guides at all-guides.com Tie-line interface 1. Calling an intercom station of remote extention exchange Dial (access No. for Tie-line interface). After confirm- ing a dial tone from the remote extension exchange, dial the station number as follows: Specified No. - Page 111 All manuals and user guides at all-guides.com EXES-6000, CP-66 Summary of Dial Operations (4-digit dialing)(Example of single exchange system) Function Dialing operation Number assignment Press-to-talk Remote response Remote response registration Answering continuous calling tone Privacy Secretary transfer Single-digit registration Single-digit dialing Personal number registration In/out indicator lamp ON Personal number cancellation...
- Page 112 All manuals and user guides at all-guides.com Function Dialing operation Number assignment All call + 7-zone paging All call + 31-zone paging Combination paging All call paging response Zone paging response Paging transfer One-shot, relay-make output Relay make/break output 8-selectable, one-shot, relay make output 8-selectable output (Decimal output) 4-digit decimal output...
- Page 113 All manuals and user guides at all-guides.com Selected Paging covered. The Selected Paging permits simultaneous paging of (6) Selected External All-Call Paging arbitrary stations or zones selected freely at a master station. It is broadly divided into two classifications: This is the same as the Global All-Call Paging except that Individually Selected Paging and Matrix Selected Paging.
- Page 114 All manuals and user guides at all-guides.com 3. Selected rented-line station paging and response [Paging] First dial and then (Access Nos. of the remote extension system/station Nos.). After dialing station Nos., press Specified No. Specified No. A maximum of 20 zones can be paged simultaneously. However, the number decreases depending on the number of available links.
- Page 115 All manuals and user guides at all-guides.com 5. Selected global all-call paging and response [Paging] First dial and then (Access Nos. of the remote extension system). After dialing completion, press Specified No. Same all-call paging is provided over all selected systems as well as the entire system having the operating station.
- Page 116 All manuals and user guides at all-guides.com B. Matrix Selected Paging • A maximum of four station or zone numbers can be registered at a time. • If any one station or zone in a paged group is busy, this function cannot be used. •...
- Page 117 All manuals and user guides at all-guides.com (3) Global matrix zone paging and response [Paging] First dial and then (system access No.). Dial (zone No.). After zone No. entry completion, press . Same Exchange Zone No.1 Zone No. 3 number zone paging is provided over all selected access No.
-
Page 118: Speech Message
All manuals and user guides at all-guides.com Speech message To make this function available, both the SI-62 interface and SM-600 speech message unit must be connected to the EXES-6000 exchange. The capacity of a voice mailbox is up to 128 x 8-second message. Functions include (1) Absence-mailing. - Page 119 All manuals and user guides at all-guides.com 3) Cancelling the Absence message Voice mailbox Shifting the Privacy switch back to OFF erases the absence message but allows all incoming calls stored in the voice mailbox to be heard. To hear the recorded message again, dial Once the Privacy switch has been set to OFF, the recorded Absence message is cancelled.
-
Page 120: Background Music (Bgm)
All manuals and user guides at all-guides.com Background music (BGM) Eight (8) different BGM channels are available for selection. Dial (channel No. 1~8), and the selected BGM is broadcast from the station. To disconnect the BGM, dial BGM equipment 1 Notes. -
Page 121: Alarm
All manuals and user guides at all-guides.com Alarm Operation of this fuction not only terminates every conver- sation and paging call, but also temporarily stops BGM and time signal broadcasts, allowing the alarm call to go through all the stations. The interrupted broadcasts are automatical- ly restored as soon as the alarm call is finished. - Page 122 All manuals and user guides at all-guides.com Printed in Japan 1 3 3 - 0 6 - 1 5 6 - 7 B...