Saving Patterns To A Memory Card [F5 (Card)] - Roland V-DRUMS TD-20 Owner's Manual

Percussion sound module
Hide thumbs Also See for V-DRUMS TD-20:
Table of Contents

Advertisement

Saving Patterns to a Memory Card
[F5 (CARD)]
You can use an optional CompactFlash memory card to save
pattern data.
PATTER CARD screen
fig.07-PtnCard_70
930 (Modified)
* Never remove a CompactFlash card while the
CompactFlash indicator on the TD-20's top panel is lit.
Doing so may corrupt the unit's data or the data on the
CompactFlash card.
931
* Carefully insert the CompactFlash card all the way in—
until it is firmly in place.
Cards supported by TD-20 are 3.3 V CompactFlash
cards with the capacity of 16 to 512 MB.
You can check the amount of memory card available by
pressing [TOOLS] - [F2 (INFO)] - [F2 (CARD)] (p. 84).
Save/Load and Copy Functions of the TD-
20
fig.CardImage
[CARD]
[LOAD]
SETUP
[COPY]
KIT
INST
TD-20
PERC
TRIG
CHAIN
PATTERN
[LOAD]
[SAVE]
[PATTERN] - [EDIT] - [CARD]
[SAVE]
SETUP
KIT
INST
PERC
TRIG
CHAIN
PATTERN
Backup (1–8)
PATTERN
Pattern (1–100)
CompactFlash
Chapter 7. Sequencer (Recording/Editing)
Saving a Pattern to a Memory Card
[F1 (SAVE)]
Patterns will be saved up to 100.
1. Insert a CompactFlash card into the
CompactFlash card slot on the TD-20's front
panel.
2. Press [PATTERN] - [F4 (EDIT)].
The "PATTERN EDIT" screen appears.
3. Press [F5 (CARD)].
The CompactFlash indicator light, and the "PATTERN
CARD" screen appears.
* If you insert a card being used for the first time by the TD-20,
display shows "Unformatted!" Refer to Formatting a
Memory Card [F4 (FORMAT)] (p. 72) and initialize it.
4. Press [F1 (SAVE)].
The "PATTERN SAVE" screen appears.
fig.07-PtnSave1_70
5. Press [CURSOR (up)], and then use [+/-] or
[VALUE] to select the pattern you want to save.
6. Press [CURSOR (down)], and then use [+/-] or
[VALUE] to select a backup pattern to which
you want to save the pattern.
* You can select an empty backup pattern with the lowest
number by pressing [F4 (NEW)].
7. Press [F5 (SAVE)].
The confirmation screen appears.
fig.07-PtnSave2_70
* To cancel, press [F1 (CANCEL)].
8. Press [F5 (EXECUTE)] to save the pattern.
67

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents