When you use TD-20/12 with PD-125/105
■ If you have a rim sound in hitting only the
head of the pad
If you have a rim sound when hitting only the head of the pad, please
adjust the parameter of the TD-20/12 as follows:
1. Press [TRIGGER] - [F5 (ADVANCE)] - [F2 (RIM)].
2. Strike the pad you wish to set.
3. Decrease the value of "RimShot Adjust."
* Please set the highest value as far as the Head Shot does not lead a rim sound
when hitting the head strongly.
■ If you can not get a Rim Shot properly
When you have an unnecessary head sound in a Rim Shot, it would be
better to adjust the following parameter for your playing them properly.
1. Press [TRIGGER] - [F5 (ADVANCE)] - [F2 (RIM)].
2. Strike the pad you wish to set.
3. Increase the value of "RimShot Adjust."
* Please set the highest value as far as the Head Shot does not lead a rim sound
when hitting the head strongly.
When you use the other sound module
than TD-20/12
In the case of using the other sound module than TD-20/12, please adjust
the "Rim Sensitivity" in place of "RimShot Adjust."
* The "Rim Sensitivity" has the same function as the "RimShot Adjust."
* Regarding how to adjust the "Rim Sensitivity" and the Trigger Input jack that is
rim capable, please refer to the owner's manual for the product you use.
All rights reserved. No part of this publication may be reproduced in any form
without the written permission of ROLAND CORPORATION.
PD-125/105 LEAFLET
CAUTION
Copyright © 2004 ROLAND CORPORATION
*
4
0
5
6
6
4
40566478
3PD
7
8
-
0
3
*
Need help?
Do you have a question about the TD-12 and is the answer not in the manual?
Questions and answers