Hi-Hat Settings [F3 (Hi-Hat)] - Roland V-DRUMS TD-20 Owner's Manual

Chapter 5. Trigger Settings [TRIGGER]
Curve: LOG1, LOG2
Compared to LINEAR, a soft playing produces a greater
change.
fig.VeloC-LOG.e
Volume
LOG1
Curve: SPLINE
Extreme changes are made in response to playing dynamics.
fig.VeloC-SPLINE.e
Volume
Striking Force
SPLINE
Curve: LOUD1, LOUD2
Very little dynamic response, making it easy to maintain
strong volume levels. If using drum triggers, these settings
help maintain stable levels.
fig.VeloC-LOUD.e
Volume
LOUD1
46
Volume
Striking Force
LOG2
Volume
Striking Force
LOUD2

Hi-Hat Settings [F3 (HI-HAT)]

1. Press [TRIGGER] - [F3 (HI-HAT)].
[TRIGGER] lights, and the "TRIGGER HIHAT" screen
will appear.
fig.05-TrigHH_70
2. Use [CURSOR (up/down)] to select the
parameter.
3. Use [+/-] or [VALUE] to adjust the setting.
4. When you're finished, press [EXIT] to return to
the "DRUM KIT" screen.
Parameter Value
Hi-Hat Ctrl VH, FD
Type
When HH Ctrl Type is set to "VH"
Offset -100– +100
Foot Splash -10– +10
Sens
Noise Cancel 1–3
When HH Ctrl Type is set to "FD"
CC Max 90, 127
CC NORMAL,
Resolution HIGH
*1: The bigger you set the value, the stronger the pressure
effect is when you step the pedal down completely.
*2: When you control the pitch by Hi-Hat Pedal (p. 35), the
pitch can be changed smoothly if you set "High."
You can adjust the "Offset" of VH-12 automatically (p.
21).
Description
Used Hi-Hat Controller
VH: VH-12
FD: FD-7/8
Extent of Opening Hi-Hat
The bigger the value is,
the wider the opening
extent is.
Amount of how easy to
make the Foot Splash
Amount of strength to can-
cel the bow and edge noise
when you play "Foot
Close."
The bigger the value is,
the more difficult to
have a noise excluding
the "Foot Close."
Amount of Control
Change that is transmitted
in stepping the pedal down
completely. (*1)
Amount of Data Resolu-
tion that is transmitted
from Hi-Hat Pedal. (*2)