Grizzly G0634X Owner's Manual page 7

Jointer Fence Controls
K
J
Figure 4. Locations of jointer fence controls.
H. Fence Tilt Scale: Indicates angle of fence tilt
adjustment.
90° Fence Stop: Allows fence to be quickly
I.
positioned at 90° when adjusting tilt setting.
Fence Tilt Lock: Tightens to secure fence tilt
J.
setting at desired angle; loosens to allow tilt
adjustment.
K. Fence Lock Lever: Tightens to secure lateral
fence position along width of tables; loosens
to allow adjustment.
Figure 5. Location of 45° fence stop.
45° Fence Stop: Allows fence to be quickly
L.
positioned at 45° when adjusting tilt setting.
Model G0634X (Mfd. Since 11/20)
H
I
L
Jointer/Planer Conversion
Components
Figure 6. Location of fence lock.
M. Fence Lock Lever: Loosen to allow removal
of fence when converting jointer to planer.
N
Figure 7. Locations of table lock levers.
N. Table Lock Levers: Loosen and pull out to
swing jointer tables into UP position when
converting jointer to planer.
M
N
-5-