Grizzly G0634X Owner's Manual page 41

Fence
Oil Type ................SB1365 or ISO 68 Equivalent
Oil Amount ...........................................1–2 Drops
Lubrication Frequency ....................... As Needed
Place one or two drops of ISO 68 machine oil on
fence pivot points and other lubrication locations
as needed (see Figure 45–46).
Figure 45. Front fence lubrication locations.
Figure 46. Rear fence lubrication location.
Model G0634X (Mfd. Since 11/20)
Jointer Tables
Oil Type ................SB1365 or ISO 68 Equivalent
Oil Amount ...........................................1–2 Drops
Frequency.......................................... As Needed
The jointer infeed and outfeed table elevation
knobs and pivot points require periodic lubrica-
tion. Raise and secure tables in up position and
lubricate with ISO 68 machine oil as needed (see
Figures 47–48). Wipe off excess oil and sawdust
with a cloth.
Figure 47. Jointer infeed table lubrication
locations.
Figure 48. Jointer outfeed table lubrication
locations.
-39-