Jackshaft Bearing Support Assembly - RHINO TURBO 96 TURBO 96 Operator's Manual

ASSEMBLY

JACKSHAFT BEARING SUPPORT ASSEMBLY

Attach Carrier Mount Weldment (3) to deck with bolt 1/2" x 1-1/4" (12) Lockwasher (21) and Flatwasher (16) for
the front two holes and use Bolt 1/2" x 1-1/2" (22) and Lockwasher (21) for the rear. Then attach Bearing
Assembly (27) to Carrier Mount Weldment (3) with Bolt (10) and Locknut (11). Insert the splined end of
Jackshaft (6) into the Bearing Support. (Figure Asm-R-0301)
TURBO 96 01/11 Assembly Section 3-12
© 2011 Alamo Group Inc.