Table of Contents
Advertisement
Installation and operation
•
Never place the appliance in humid or wet environment.
•
Place the appliance in a way making the connections easily accessible, so that
they may be quickly disconnected if such a need arises.
•
The appliance should be placed on surfaces that are:
– even, with sufficient bearing capacity, resistant to water, dry and resistant
to high temperatures;
– sufficiently large, and thus enabling usage of the appliance with no
problems;
– easily accessible;
– well ventilated.
•
Maintain sufficient clearance from table edges. The appliance might turn over
and fall down.
•
Leave a minimum clearance of 15 cm from all sides and make sure there is
enough room at the top, and that the ON/OFF switch is easily accessible.
Power supply connection
•
Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
•
Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
•
The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
5.2
Operation
WARNING
Injury hazard posed by rotating components of the appliance!
Never put hands nor kitchen utensils into the strainer when the motor
operates. First, use the ON/OFF switch to switch the appliance off, wait
for the motor to stop and only then do remove the fruit pulp from the
strainer.
150140
EN
11 / 14
Advertisement
Table of Contents
