Table of Contents
Advertisement
Use and Maintenance Manual
MONOBLOCK Vacuum Unit
3. Movement and unpacking
The MONOBLOCK vacuum unit is shipped fixed to a europallet inside a cardboard box to protect it during
transport and delivery.
It is advisable not to remove the packaging until the moment of installation, to avoid possible damage.
2
OVIM
ATTENTION
Suitable lifting equipment must be used when moving the vacuum unit, and particular
care must be taken to correctly balance loads.
CAUTION
Never turn a vacuum unit that is still packed upside down.
Do not use box cutters to remove packaging materials.
The manufacturer declines all and any liability for damage caused by the incorrect
opening of packaging materials.
ATTENTION
During movement operations use appropriate items of personal protection equipment.
Failure to use appropriate items of personal protection equipment during movement
and unpacking may expose the operator to the risk of crushing of the feet due to loss of
stability.
Failure to wear safety gloves prevents a safe grip during movement operations with the
risk of accidental falls.
On delivery it is necessary to immediately check the materials supplied for correctness
and lack of damage with the transporter to avoid claims for damage not attributable to
shipping.
If there is visible damage on the product the consignment has to be refused.
If the delivery is accepted there cannot be demanded any
refunds.
On delivery it is necessary to immediately check the materials supplied for correctness and lack of damage
with the transporter to avoid claims for damage not attributable to shipping.
ATTENTION
The support surface must not have a slope of more than 8%, to avoid the risk of overturning
due to loss of stability.
IMPORTANT
Packaging materials must be kept for the entire period covered by the guarantee.
>>> Movement and unpacking
16
Advertisement
Table of Contents
