Table of Contents
Advertisement
Use and Maintenance Manual
MONOBLOCK Vacuum Unit
2.6 Frame
The frame is the support structure of the MONOBLOCK vacuum unit. Its adjustable support feet allow the
vacuum unit to be levelled even on irregular surfaces.
The compressor for the self-cleaning of the filter (only for models with self-cleaning) is housed on the
frame.
2.7 Dust container
The dust container has a collection capacity of 90 litres or 120 litres. The container has a dust collection bag
for the disposal of dust. The level of dust in the dust container must be checked approximately every two
months, depending on the conditions of use.
The handle is used to open the dust container, also making the cartridge filter accessible.
The dust container also has a low-pressure pipe that guarantees the retention of the dust collection bag.
2.8 Central section
The central section contains the main control components of the MONOBLOCK vacuum unit, as follows:
●
Electrical control panel
o
Inverter
o
Main switch
o
Check button to reset the ordinary maintenance alarms
o
Manual Self-Cleaning button (only for models with self-cleaning)
o
Relay module (optional)
●
Cartridge filter
●
Pressure transducer for regulation of the operating suction pressure
●
Compressor for filter self-cleaning function (CM126MA, CM126TA and CM238TA)
●
Compressed air tank for filter self-cleaning function (only for models with self-cleaning)
●
Solenoid valve for filter self-cleaning function (only for models with self-cleaning)
2.9 Head Stage
The head stage contains:
-
Vacuum turbine
-
Thermo sensor
-
User interface panel
>>> MONOBLOCK vacuum unit technical
features
14
Advertisement
Table of Contents
