Table of Contents
Advertisement
•
Select the Device on the RSK from the drop
down list.
•
In the sub pane, select the kernel version that
ends in '.RSK'.
•
Press <Next>.
If you have copied the kernel to another location to modify for
a different crystal frequency, the device will not be listed in the
sub pane. In this case:
•
Press <Other...> and navigate to your
modified kernel.
•
Select E8DIRECT as the communication Port
•
Press <Next>.
•
The default settings are suitable for an
un-modified RSK board.
•
Confirm the Crystal Frequency matches the
board.
•
Confirm the main clock frequency multiplier.
•
Confirm the peripheral clock multiplier.
•
Press <Next>.
10
Advertisement
Table of Contents
