9.2. Electrical Adjustment
9.2.1. Initial Guideline
The table below shows which adjustments are necessary according to the unit parts and
individual parts to be replaced. Make sure to perform these adjustments shown below as
necessary.
9.2.2. Installation of USB-SERIAL driver
Execute the "Setup.exe" file in "ComMass" folder by double clicking to install the USB-SERIAL
driver.
9.2.3. COM Mode
If a Disc or SD Card is inserted, remove before operation.
To enter the PC connection (COM) mode, push the [PHOTO SHOT], [RECORDING START/STOP]
and [JOYSTICK CONTROL UP] simultaneously for 3 seconds without connecting the USB Cable.
36