Table of Contents
Advertisement
Message Mode
Leave audio/video messages for family or
friends.
Tally Lamp
Note:
s One message limit.
e If tape is ejected or battery (if used) is
depleted while in Stand-by mode, the
message mode is canceled. To
playback message (tape is inserted
and/or new power source is attached),
set POWER to VCR and press PLAY.
* Title cannot be displayed in Message
mode.
* If Message mode is selected, the
following functions are not available:
Time Lapse, Security.
40
Before you begin...
+ Connect Camcorder to power source.
Use AC Adaptor for extended use.
* Insert cassette with record tab (page 13).
s Set POWER to CAMERA.
1
Press MENU for MENU mode.
Press UP 4 or
DOWN
Z to select
` ON
. Press
VIDEO EFFECTS ` FADE
DISPLAY to select
rg
ON,
SELECT:
PUSH F/A KEY
SET
i
DISPLAY KEY
END
: PUSH MENU KEY
Press MENŲ for Message Stand-by
Mode. (If cassette is not inserted,
"Ea" will flash.) Flip LCD in
direction of lens.
Press RECORD/ PAUSE to start
recording your message.
* Tally lamp flashes and a display
alerts recipient.
Press RECORD/ PAUSE to end.
PAUSE
MESSAGE
START: RECORD/PAUSE KEY
STOP: RECOAD/PAUSE KEY
* Camcorder auto-rewinds to the
message Start, then goes into
Stand-by mode.
MESSAGE
PRESS
PLAY
KEY
Press PLAY to playback message.
s LCD can be in any position for
playback.
* To cancel feature, set POWER to
OFF.
Advertisement
Table of Contents
