9. Measurements and Adjustments
9.1. Mechanical Adjustment
9.1.1. ENVELOPE OUTPUT ADJUSTMENT
When replacing the Main Chassis Unit or the Cylinder Unit, be sure to perform the Envelope
Output Adjustment as shown below.
1. Remove the Bottom Case Unit, Top Unit and Side R Ass'y (Refer to
"Disassembly and Assembly
2. Connect the 90 Pin Extension Cable (LSUA0060) between
Connector B1 on the Main P.C.B. and B9901 on the Camera P.C.B.
Fig. M6
Instructions.").
33