Unpacking And Repacking; Unpacking The Product; Repair And Repacking The Product - Graco Therm-O-Flow 5 Instructions-Parts List Manual

Unpacking and Repacking

Unpacking the Product


Your Therm-O-Flow 5 or Mini-5 was carefully
packaged for shipment by Graco. When the package
arrives, perform the following procedure to unpack the
units:
1. Inspect the shipping box carefully for shipping
damage. Contact the carrier promptly if damage is
discovered.
2. Unseal the box and inspect the contents carefully.
There should not be any loose or damaged parts
in the box.
3. Compare the packing slip against all items in-
cluded in the box. Any shortages or other inspec-
tion problems should be reported immediately.
4. Store the box and packing materials in a safe
place for future use. Graco recommends that all
packing materials be saved in case the unit needs
to be shipped again.
310528
8

Repair and Repacking the Product

When the Therm-O-Flow
service, it is the purchaser's responsibility to have the
unit repaired. As an option, the purchaser can have the
unit repaired by an authorized Graco distributor.
On-site Service

Therm-O-Flow 5 and Mini-5 components are cus-
tomarily serviced by the purchaser or an authorized
Graco technician. When service is required, follow the
Service procedures in this manual.

5 or Mini-5 requires