Cleaning The Imprinter - Fujitsu fi-8190 Operator's Manual

Cleaning the Imprinter

While you use the imprinter frequently, ink sticks to the print cartridge holder base which makes the paper dirty.
As a part of daily maintenance, clean the print cartridge holder base by following the procedure below.
ATTENTION
When cleaning, use an absorbent cloth or a waste cloth, and gently wipe off the ink on the base.
If the ink is dried, gently wipe it with a moistened cloth. (Since the ink is water soluble, it can be cleaned with
water.)
1
Turn off the scanner.
2
Remove the print cartridge.
(Refer to steps 2 to
3
Open the print section (imprinter cover).
4
Dab the surface of the base of the print cartridge with a cloth or waste cloth to remove the ink.
4 in Replacing the Print Cartridge (page 29).)
35
Daily Care