THOMSON Speedtouch 580 Setup And User Manual page 90

7 Support
On Mac OS X
88
Proceed as follows:
Insert the SpeedTouch™ Setup CD-ROM in your PC's CD-ROM drive.
1
Open the CD-ROM and browse to the osx folder.
2
In the osx folder double-click upgradeST.pkg to install the SpeedTouch™
3
Upgrade application.
The installation wizard may prompt you for authentication. If this is the
Note
case, click
If your computer runs Mac OS X v10.3, your computer may prompt
Note
you to run a program to determine if the installer package can be
installed. If this the case, click Continue.
After installation go to the Applications > SpeedTouch folder on the system
4
startup disk (usually the location where you installed the SpeedTouch™ Upgrade
application) and double-click upgradeST to start the
SpeedTouch™ Upgrade Wizard.
The Choose Language window prompts you to select a language.
5
Select the language of your choice and click OK.
The selected language will also be used as default language in the
Note
SpeedTouch™ web pages. See
mation on how to change the web page language.
See " Upgrade procedure" on page 89
to enter your credentials.
" Language" on page 75
to continue.
for more infor-
E-DOC-CTC-20040123-0001 v3.0