THOMSON Speedtouch 580 Setup And User Manual page 60

5 SpeedTouch™ Web Interface
Security
58
Select Security to:
•
Choose and configure a security level:
By default all security is disabled. Select the desired security configuration
(WEP or WPA-PSK) to enhance your security level:
To enable level 1 - WEP
Select the entry Security Level 1 WEP which allows you to proceed with
1
the following window:
Select how you intend to enter the WEP key.
2
Enter the WEP key of your choice. In case of:
3
•
64-bit, Alphanumeric
The WEP key must consist of 5 alphanumeric characters.
•
64-bit, Hexadecimal
The WEP key must consist of 10 hexadecimal digits
•
128-bit, Alphanumeric
The WEP key must consist of 13 alphanumeric characters.
•
128-bit, Hexadecimal
The WEP key must consist of 26 hexadecimal digits
Hexadecimal values range from 0 to 9 and from A to F.
Note
Alphanumeric values range from 0 to 9 and from A to Z.
Click Apply to apply the WEP encryption settings.
4
The colour of the WLAN LED will change to amber.
Note
Reconfigure your wireless client(s) to use the changed settings.
5
Click
6 Save all
to save your changes to persistent memory.
E-DOC-CTC-20040123-0001 v3.0